|
[Sponsors] |
March 2, 2021, 07:34 |
Boundary Layer continuity problem
|
#1 |
New Member
Andrea Michelotti
Join Date: Mar 2021
Posts: 12
Rep Power: 5 |
Hello to everyone,
this is my first post here. I am meshing a UAV with STAR CCM+. I imported a solid model, with Fuselage, Wing and Tail all separated and assembled in CATIA V5. It works fine but the boundary layer isn't so good. It varies in thickness when there are intersections between the different bodies, in particular Fuselage and Wing. It is continuos but inconsistent. Have someone any suggestion to kindly give me? Thanks in advance |
|
Tags |
boundary layer, boundary layer grid, boundary layer meshing, star ccm+ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 08:44 |
Floating point exception error | lpz_michele | OpenFOAM Running, Solving & CFD | 53 | October 19, 2015 02:50 |
Prismatic boundary layer | KateEisenhower | enGrid | 5 | September 15, 2015 07:48 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 04:05 |
Could anybody help me see this error and give help | liugx212 | OpenFOAM Running, Solving & CFD | 3 | January 4, 2006 18:07 |