|
[Sponsors] |
STAR CCM+ PostProcessing-Problem with Isosurface |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 20, 2024, 11:39 |
STAR CCM+ PostProcessing-Problem with Isosurface
|
#1 |
New Member
Vicente Jose Noguer Roig
Join Date: May 2023
Posts: 2
Rep Power: 0 |
hello,
I am new in StarCCM+ and while doing the post processing I had an issue creating the wave pattern. I am following the tutorial from here: https://docs.sw.siemens.com/document...%23wwID0EGQSJE But when I do the isosurface it happens the following: Can somebody explain me why does it happens this |
|
May 21, 2024, 00:22 |
|
#2 | |
Member
Peresvet
Join Date: Mar 2021
Location: USSR
Posts: 56
Rep Power: 5 |
Quote:
Try to create an air-water ratio of 0.5. Assign the parts correctly. Assign the correct field function to the water surface. These are the main reasons. 111.jpg 222.png 333.png Last edited by Peresvet; May 23, 2024 at 08:58. |
||
Tags |
post procesing, starccm+ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Interfaces position in Star CCM | GV77 | STAR-CCM+ | 5 | March 25, 2024 15:50 |
Star CCM Acoustics Analysis of a pipe | Hassaan595 | STAR-CCM+ | 0 | June 5, 2023 17:09 |
Star ccm+ 12 version problem | Frikha | STAR-CCM+ | 2 | March 24, 2017 14:22 |
Error while importing Solid Works Model into Star CCM | Sandy7 | STAR-CCM+ | 3 | December 19, 2016 12:21 |
Problem In Star CCM Plus | ramarya | STAR-CCM+ | 1 | July 10, 2011 06:59 |