|
[Sponsors] |
July 5, 2010, 12:14 |
Which Tensor.
|
#1 |
New Member
james charlton
Join Date: Aug 2009
Posts: 27
Rep Power: 17 |
Hi, could anyone offer a better explanation of the different Tensor profiles from that which is given in the user manual. And if possible highlight which one may be appropriate for the following model;
The model exists of simple cube (region 1) - in which a sphere floats in the middle (region 2). Four of the external walls of the cube are set as a pressure outlets, one is set as a wall (floor) and the remaining is the velocity inlet (10m/s). The sphere is set as a porous region, with in-place boundaries. The physics consists of the following criterion; 3D, Steady, Gas, Seg flow, Constant Density, Turbulent, K-epsilon. Any advice would be appreciated. Regards james |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stress tensor components | ap | FLUENT | 1 | August 15, 2023 03:41 |
How to modify the stress tensor of momentum eqns. | Jason | FLUENT | 1 | November 26, 2010 05:20 |
curvature correction term, material derivative of a tensor | volker | OpenFOAM Programming & Development | 7 | June 3, 2010 08:08 |
About deformation gradient tensor | ZHANG | Main CFD Forum | 0 | June 18, 2007 12:51 |
second invariant of rate-of-strain tensor | Chun Min Chew | Main CFD Forum | 3 | December 10, 2003 11:34 |