|
[Sponsors] |
3D external periodic multi-zone flow with RANS-based Turbulence model |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 19, 2014, 13:33 |
3D external periodic multi-zone flow with RANS-based Turbulence model
|
#1 |
Senior Member
|
Hello
Dear Developers, Thank you for new release along with educational version which is a great idea. Recently I am studying wind turbine performance in wind farm. Consequently for numerical study of the concept I decided to use SU2 for some reasons. Although, for better explaining the concepts, a pathline picture have been attached from a simulation of mine albeit with other solver. Following this further, I am defining stationary zone and rotational zone periodically in my grid. First point that I am wondering about is it possible to have stationary and rotational zone in one simulation using SU2's rotational frame options in the last version? anticipating your answer, then should we define interface boundary condition between two zones? The second point is that numerical study for such a concepts confront with heavy computational cost which enforce me to simplify the simulation by using conformal and non-conformal periodic boundary condition. Consequently, I need to use parallel processing with these periodic boundaries, stationary and rotational zones along with RANS equations. Already, I found out that periodic boundaries could be used in parallel in version 2.0.2 and rotational frame could be used with Euler equation in serial in version 2, but is it possible to use all the aforementioned capability (periodic boundaries, stationary and rotational zones, RANS equation and parallel) in later versions like 2.0.5 or 2.0.8 or even 3.0.0? If no, how can one develop these capabilities in the code? Thanks ever so much for your consideration. I really do appreciate your hint. Bests, Payam |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) | Aadhavan | OpenFOAM Meshing & Mesh Conversion | 2 | March 8, 2018 01:47 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Help! How to hold turbulence in a 2d channel flow RANS simulation | 1/153 | Main CFD Forum | 7 | July 27, 2012 15:39 |
Problem in running ICEM grid in Openfoam | Tarak | OpenFOAM | 6 | September 9, 2011 17:51 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |