CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Favre averaging

Favre averaging

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
 
(2 intermediate revisions not shown)
Line 1: Line 1:
-
Let <math>\Phi</math> be any dependent variable. This variable can be decomposed into a fluctuating part <math>\Phi''</math> and mean part <math>\overline{\Phi}</math> using a density weighted average in the following way:
+
Let <math>\Phi</math> be any dependent variable. This variable can be decomposed into a mean part <math>\widetilde{\Phi}</math> and a fluctuating part <math>\Phi''</math> using a density weighted average in the following way:
<table width="100%">
<table width="100%">
 +
<tr><td>
 +
:<math>\Phi \equiv \widetilde{\Phi} + \Phi''</math>
<tr><td>
<tr><td>
:<math>\widetilde{\Phi} \equiv \frac{ \int_T \rho(t) \Phi(t) dt}
:<math>\widetilde{\Phi} \equiv \frac{ \int_T \rho(t) \Phi(t) dt}
Line 7: Line 9:
</td><td rowspan="2" width="5%">(1)</td></tr>
</td><td rowspan="2" width="5%">(1)</td></tr>
<tr><td>
<tr><td>
-
:<math>\Phi'' \equiv \Phi - \widetilde{\Phi}</math>
+
where the overbars (e.g. <math>\overline{\rho \Phi}</math>) denote averages using the Reynolds decomposition.
-
</td></tr>
+
<tr><td>
 +
auxiliary relations include
 +
<tr><td>
 +
<math>\overline{\rho \Phi''}=0</math>
 +
<tr><td>
 +
<math>\overline{\rho \widetilde {\Phi}}=\overline{\rho}\widetilde {\Phi}=\overline{\rho \Phi}</math>
</table>
</table>
-
Favre averaging is sometimes used in compressible flow to separate turbulent fluctuations from the mean-flow. In most cases it is not necessary to use Favre averaging though, since turbulent fluctuations most often do not lead to any signigicant fluctuations in density. In that case the more simple [[Reynolds averaging]] can be used. Only highly compressible flows and hypersonic flows is it necassary to perform the more complex Favre averaging.  
+
Favre averaging is sometimes used in compressible flow to separate turbulent fluctuations from the mean-flow. In most cases it is not necessary to use Favre averaging though, since turbulent fluctuations most often do not lead to any signigicant fluctuations in density. In that case the more simple [[Reynolds averaging]] can be used. Only in highly compressible flows and hypersonic flows is it necessary to perform the more complex Favre averaging.  
Favre averaging can be used to derive the [[Favre averaged Navier-Stokes equations]].
Favre averaging can be used to derive the [[Favre averaged Navier-Stokes equations]].

Latest revision as of 21:48, 26 August 2013

Let \Phi be any dependent variable. This variable can be decomposed into a mean part \widetilde{\Phi} and a fluctuating part \Phi'' using a density weighted average in the following way:

\Phi \equiv \widetilde{\Phi} + \Phi''
\widetilde{\Phi} \equiv \frac{ \int_T \rho(t) \Phi(t) dt}
{ \int_T \rho(t) dt } \equiv \frac{\overline{\rho \Phi}}{\overline{\rho}}
(1)

where the overbars (e.g. \overline{\rho \Phi}) denote averages using the Reynolds decomposition.

auxiliary relations include

\overline{\rho \Phi''}=0

\overline{\rho \widetilde {\Phi}}=\overline{\rho}\widetilde {\Phi}=\overline{\rho \Phi}

Favre averaging is sometimes used in compressible flow to separate turbulent fluctuations from the mean-flow. In most cases it is not necessary to use Favre averaging though, since turbulent fluctuations most often do not lead to any signigicant fluctuations in density. In that case the more simple Reynolds averaging can be used. Only in highly compressible flows and hypersonic flows is it necessary to perform the more complex Favre averaging.

Favre averaging can be used to derive the Favre averaged Navier-Stokes equations.

My wiki