CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How to crack this problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 10, 2003, 08:25
Default How to crack this problem
  #1
Lee
Guest
 
Posts: n/a
I want to create a model which consists of one long round pipe(about 6m long) and one big cubic volume(about 1m3),one end of the pipe should enter into the volume about 200mm long.So I want to simulate that pipe's end by creating a baffle in the volume.I just simulate the one quarter of the whole model.

But when I created the volume by dividing it into some blocks,I found when I tried to create the baffle,in the big volume there were always some gap existed between the different blocks surfaces.

So are there some means to eliminate those gaps? Or are there some other means to create a curve baffle(its section shape is like a rainbow)?

Thank you very much for your help!

Lee
  Reply With Quote

Old   September 11, 2003, 11:51
Default Re: How to crack this problem
  #2
cjtune
Guest
 
Posts: n/a
You can just leave the cracks/gaps there and they'll act like thin walls, just that you can't set porosity or thermal resistance values unlike with baffles.

Baffles can only be used when the vertices of the cell faces on both sides of a baffle coincide (and are to be merged later). Don't forget to apply the baffle boundary type to the baffle cells too.

  Reply With Quote

Old   September 12, 2003, 10:40
Default Re: How to crack this problem
  #3
Vispy
Guest
 
Posts: n/a
Hi I am desigining a model of about .025mts*.005*2.44mts. The flow is going to be in the direction of 2.4 mts its from the bottom to the top and its a slot like a wall made up of 6 faces of which 4 of walls the side ones the bottom gonna be velocity inlet top gonna be pressure outlet. The problem i am facing is that i switched the edges and got a volume but it looks like there is no flow happening in the centre this is a lamilar flow.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crack check problem Tunc CD-adapco 7 March 16, 2011 01:06
Crack problems Sara CD-adapco 3 August 6, 2008 12:18
Crack error in STAR-CD Sachin CD-adapco 3 April 17, 2008 01:13
found crack in prostar but no crack in CCM+ ?? Ingear CD-adapco 4 October 23, 2006 09:37
Crack problems again Carlos Saraiva CD-adapco 2 January 31, 2003 05:12


All times are GMT -4. The time now is 06:46.