CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

CFXSOLVE in BATCH

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 21, 2007, 17:06
Default CFXSOLVE in BATCH
  #1
S.
Guest
 
Posts: n/a
When you are running CFX5SOLVE interactively, you have the option of editing the definition file while the job is running. Is there any commands or way of changing the defintion file while CFX is running in batch mode? For example, I am doing a problem involving natural convection. I am trying to slowly increase the Ra number (increasing it by chaning gravity, for example) until my solution converges at the Ra number I would like. So, if I am doing it interactively, I can watch the residuals and bump up my Ra number slowly while it is running. In batch mode, I have to stop it, change the parameter I want and start it up again. Thanks.
  Reply With Quote

Old   June 21, 2007, 18:41
Default Re: CFXSOLVE in BATCH
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

You can load a run which was started in batch mode in Solver manager and edit it from there.

Glenn Horrocks
  Reply With Quote

Old   June 23, 2007, 05:18
Default Re: CFXSOLVE in BATCH
  #3
Johnson
Guest
 
Posts: n/a
There is a command :

cfx5control <directory> options

which you can use to edit, inject commands and optionally write backup files.

Type 'cfx5control -help' for details.

Regards,

Johnson
  Reply With Quote

Old   July 4, 2007, 04:04
Default Re: CFXSOLVE in BATCH
  #4
Pankaj
Guest
 
Posts: n/a
hi

As I know cfxsolver can run without solver manager i.e. in the background or in batchmode.

& therefore u can monitor run in progress by selecting its run directory and can edit run in progress in solver manager,no need to stop and restart.

Pankaj.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
to run a replayfile in batch mode from UNIX froztbear ANSYS Meshing & Geometry 4 May 13, 2014 08:00
Run Multiple Files in Batch nickninevah STAR-CCM+ 4 April 19, 2011 04:56
Windows XP Batch file help needed DL123 Main CFD Forum 2 July 3, 2009 08:53
Running Job in Batch mode (EFD) Nick Sessions FloEFD, FloWorks & FloTHERM 0 April 16, 2008 16:44
Prosurf in batch mode Dhruv CD-adapco 1 September 19, 2005 18:02


All times are GMT -4. The time now is 21:48.