CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Upcoming Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Upcoming Event 1 - 21 of 21, Sorted by Start Date:

June, 2017
  • 1st AIAA Geometry and Mesh Generation Workshop
    Workshop, Sheraton Denver Downtown Hotel, Denver, United States, June 3, 2017

    The goals of GMGW-1 are to assess the current state-of- the-art in geometry preprocessing and mesh generation technology and software as applied to aircraft and spacecraft systems of interest to AIAA's membership. Also, the workshop will help identify and develop understanding of areas of needed improvement (performance, accuracy, applicability) in geometry processing and mesh generation software.

  • Driving Manufacturing Innovation with Digital Design and Simulation
    Workshop, 1415 N Cherry Ave, Chicago, United States, June 6, 2017

    CIMdata’s Driving Manufacturing Innovation with Digital Design & Simulation:Challenges, Strategies & Best Practices for Business Success workshop, is the must-attend event for industrial organizations and product development solution providers interested in learning about “model-driven engineering” strategies and solutions that will enable ongoing product and manufacturing innovation to create competitive advantage, minimize total lifecycle costs, and drive top line revenue growth

  • AxCYCLE Workshop Online Course
    Course, United States, June 6, 2017

    This online training workshop provides participants with an understanding of the design, analysis and optimization of thermodynamic cycles using AxCYCLE ™.

  • ESI OpenFOAM Foundation Course
    Course, 230 W Monroe Street, Suite 900, Chicago, United States, June 20, 2017

    This course introduces the open source CFD toolbox, OpenFOAM. It provides a foundation for all aspects of OpenFOAM, from running cases to programming, so is useful to both new users and existing users wishing to broaden their basic knowledge of OpenFOAM.

  • ESI OpenFOAM Advanced Course
    Course, 230 W Monroe Street, Suite 900, Chicago, United States, June 22, 2017

    This course covers advanced topics of OpenFOAM and is designed to enable the participants to use OpenFOAM effectively on real engineering problems and develop the toolbox to suit their needs. It covers general use and programming of OpenFOAM, building on topics presented earlier in the Foundation Course. It provides a foundation for all aspects of OpenFOAM, from running cases to programming, so is useful to both new users and existing users wishing to broaden their knowledge of OpenFOAM.

July, 2017
  • AxCYCLE Workshop Online Course
    Course, United States, July 11, 2017

    This online training workshop provides participants with an understanding of the design, analysis and optimization of thermodynamic cycles using AxCYCLE ™.

  • Surface Preparation with CONVERGE STUDIO for IC Engines
    Course, 21500 Haggerty Rd., Detroit, United States, July 18, 2017

    This course offers an introduction to surface preparation in CONVERGE Studio. You will learn how to import a CAD geometry, set up boundaries, and use CONVERGE Studio’s powerful repair tools to fix surface defects. Because CONVERGE has a fully automated meshing process, you do not need to spend any time preparing the volume mesh, which simplifies the surface preparation process. THIS COURSE IS FREE TO ATTEND.

  • Internal Combustion Engine Modeling in CONVERGE
    Course, 21500 Haggerty Rd., Detroit, United States, July 19, 2017

    This two-day course offers an introduction to CONVERGE for internal combustion (IC) engine modeling. You will learn about the CONVERGE solver and modeling options while working through a typical IC engine case from start to finish. Because CONVERGE has a completely automated meshing process, you do not need to spend any time preparing the volume mesh, which simplifies the case setup process. THIS COURSE IS FREE TO ATTEND.

  • ESI OpenFOAM Foundation Course
    Course, 32605 W 12 Mile Road, Suite 350, Farmington Hills, United States, July 24, 2017

    This course introduces the open source CFD toolbox, OpenFOAM. It provides a foundation for all aspects of OpenFOAM, from running cases to programming, so is useful to both new users and existing users wishing to broaden their basic knowledge of OpenFOAM.

  • ESI OpenFOAM Advanced Course
    Course, 32605 W 12 Mile Road, Suite 350, Farmington Hills, United States, July 26, 2017

    This course covers advanced topics of OpenFOAM and is designed to enable the participants to use OpenFOAM effectively on real engineering problems and develop the toolbox to suit their needs. It covers general use and programming of OpenFOAM, building on topics presented earlier in the Foundation Course. It provides a foundation for all aspects of OpenFOAM, from running cases to programming, so is useful to both new users and existing users wishing to broaden their knowledge of OpenFOAM.

August, 2017
  • Surface Preparation with CONVERGE STUDIO for IC Engines
    Course, 6400 Enterprise Ln, Madison, United States, August 15, 2017

    This course offers an introduction to surface preparation in CONVERGE Studio. You will learn how to import a CAD geometry, set up boundaries, and use CONVERGE Studio’s powerful repair tools to fix surface defects. Because CONVERGE has a fully automated meshing process, you do not need to spend any time preparing the volume mesh, which simplifies the surface preparation process. THIS COURSE IS FREE TO ATTEND.

  • Internal Combustion Engine Modeling in CONVERGE
    Course, 6400 Enterprise Lane, Madison, United States, August 16, 2017

    THIS COURSE IS FREE TO ATTEND.

September, 2017
  • 2017 FLOW-3D Americas Users Conference
    Conference, Hotel Santa Fe, Santa Fe, United States, September 19, 2017

    We invite you to join the community of FLOW-3D users for the 2017 FLOW-3D Americas Users Conference, which will be held at the Hotel Santa Fe, September 19-21, 2017 in Santa Fe, NM. The call for abstracts is now open.

  • AxSTREAM NET Online Course
    Course, United States, September 25, 2017

    The goal of this 4 day online course is to teach attendees how to successfully use AxSTREAM NET™

October, 2017
  • Surface Preparation with CONVERGE STUDIO for IC Engines
    Course, 6400 Enterprise Ln, Madison, United States, October 17, 2017

    This course offers an introduction to surface preparation in CONVERGE Studio. You will learn how to import a CAD geometry, set up boundaries, and use CONVERGE Studio’s powerful repair tools to fix surface defects. Because CONVERGE has a fully automated meshing process, you do not need to spend any time preparing the volume mesh, which simplifies the surface preparation process. THIS COURSE IS FREE TO ATTEND.

  • Internal Combustion Engine Modeling in CONVERGE
    Course, 6400 Enterprise Lane, Madison, United States, October 18, 2017

    THIS COURSE IS FREE TO ATTEND.

November, 2017
  • ASME's International Mechanical Engineering Congress and Exposition
    Conference, Tampa Convention Center, Tampa, United States, November 3, 2017

    3-ADVANCES IN AEROSPACE TECHNOLOGY Session 3-2 ADVANCES IN AERODYNAMICS Numerical and experimental modeling. Internal and external aerodynamics. Boundary layer control (morphing, plasma actuators, etc). Natural laminar flow through design. Aeroelasticity at different scales. Innovative air-vehicle configurations. Advances in wind tunnel modeling. Cutting-edge aerodynamic design. Noise reduction. Ground and flight tests.

  • Surface Preparation with CONVERGE STUDIO for IC Engines
    Course, 21500 Haggerty Rd., Detroit, United States, November 14, 2017

    This course offers an introduction to surface preparation in CONVERGE Studio. You will learn how to import a CAD geometry, set up boundaries, and use CONVERGE Studio’s powerful repair tools to fix surface defects. Because CONVERGE has a fully automated meshing process, you do not need to spend any time preparing the volume mesh, which simplifies the surface preparation process. THIS COURSE IS FREE TO ATTEND.

  • Rotor Dynamics and Bearing Design Online Course
    Course, United States, November 14, 2017

    This course provides education by covering everything from basic definitions and the role of rotor dynamics in machines to lateral and torsional analyses as well as rotor balancing.

  • Internal Combustion Engine Modeling in CONVERGE
    Course, 21500 Haggerty Rd., Detroit, United States, November 15, 2017

    THIS COURSE IS FREE TO ATTEND.

  • World Congress on Marine Science
    Conference, Hilton Atlanta Airport 1031 Virginia Ave Atlanta, Georgia 30354, Atlanta, United States, November 16, 2017

    Advancements and Developments in Marine Sciences and Technology

[Back to Events Calendar Front Page]