-
Simulating Flow Induced Noise and Vibration for Accurate Modeling
Online Event, January 19, 2015
This online event will investigate why it is no longer
sufficient to design a product that meets flow and
thermal targets without also considering the impact on
noise and vibration performance.
-
Evaporation & Condensation Simulation in Electronics Systems
Online Event, January 15, 2015
This seminar will explain the physics that are required
to properly model evaporation and condensation and how to
implement these physics in a CFD simulation. The fogging
and de-fogging simulation of an automotive headlamp will
be used as an example to demonstrate the process and
representative results.
-
12th International Bhurban Conference on Applied Sciences & Technology
Conference, National Center for Physics, Quaid-i-Azam University, Islamabad, Pakistan, January 13, 2015
It is the largest scientific event in Pakistan which is held
regularly. It covers a wide range of topics in applied
sciences and technology. Among various distinctive features
of this conference is holding of following eight activities
in parallel. These activities include Fluid Dynamics,
Advanced Materials, Biomedical Sciences, Control and Signal
Processing, Cyber Security, Medical Sciences, Underwater
Technologies, Wireless Communication and Radar.
-
Conference on Modeling Fluid Flow (CMFF'15)
Conference, Danubius Hotel Gellert, Budapest, Hungary, January 1, 2015
The aim of the Conference is to respond
to challenges in the rapidly developing fields of fluid
mechanics: numerical simulation of
flows and physical modelling of flow processes using
advanced measurement methods.
-
13th International Bhurban Conference on Applied Sciences & Technology
Conference, National Center for Physics, Quaid-i-Azam University, Islamabad, Pakistan, January 1, 2015
Starting from the year 2002, the IBCAST is being held
consecutively for over a decade in the vicinity of
Islamabad, the capital of Pakistan. So far more than
8000 scientists and engineers have participated from
Pakistani and foreign universities as well as scientific
organizations with around 2000 research papers having
been presented. The proceedings of the conference are
published and catalogued in renowned international
journals on yearly basis.
-
A Guide to Hybrid RANS-LES Methods: Industrial Examples and Theory
Seminar, Heythrop Park The Drive Enstone, Oxfordshire, United Kingdom, January 1, 2015
This seminar will focus on these hybrid RANS-LES methods
and in particular what improvements they offer over pure
RANS and LES approaches. Through several presentations
from experts representing some of the key engineering
sectors (automotive, aerospace & turbo-machinery),
practical examples of these methods will be presented
offering attendees a chance to understand and question if
these methods could be applied to their simulations.
-
11th International Conference on Advances in Fluid Mechanics
Conference, Hotel Excelsior La Fonte, Ancona, Italy, January 1, 2015
The conference covers a wide range of topics, including
basic formulations and their computer modelling as well
as
the relationship between experimental and analytical
results. The emphasis is on new applications and research
currently in progress.
-
Training on CFD along with six months project assistanceship - for MS (Aero/Mech) aspirants in abroad universities
Course, S.S.M. Public School No.1, Chenamma Tank Bed Rd,,Vidyapeetha , Bangalore, India, December 20, 2014
Industry /research oriented course on CFD and relevant
aerospace subjects.
New initiative by Niharika Institute of Computational
Engineering (NICECFD).
-
Course on Computational Fluid Dynamics (ICEMCFD HEXA,FLUENT and CFX)-Two months,Weekend batch
Course, S.S.M. Public School No.1, Chenamma Tank Bed Rd,,Vidyapeetha , Bangalore, India, December 20, 2014
Industry oriented course on CFD. 12th successful batch from
Niharika Institute of Computational Engineering (NICECFD).
-
Finite Element Meet 2014
Conference, TIFR-CAM, Bangalore, India, December 18, 2014
We are holding a conference on finite element methods at
TIFR-CAM during
18-20 December 2014. We invite contributed papers on finite
element
methods, theory and applications, from students, postdocs
and faculty
members. For more information, please see
http://cpde.tifrbng.res.in/femeet2014
For organizing committee
-
International Conference on Computational Methods in Engineering and Health Sciences (ICCMEH-2014)
Conference, Manipal University, Manipal, India, December 17, 2014
. The theme of this conference will be broad covering
several analytical and numerical techniques, and novel
applications of computational techniques to solve problems
in engineering, health sciences, and other computational
disciplines.
-
Free Webinar: Optimization for Powertrain Applications
Online Event, December 16, 2014
In this webinar, we will explore the tools that help find
better engine designs, faster. Presenters will look at
optimization tools applied to engine design, including
adjoint solver to improve design through surface
sensitivity calculations.
-
ACCPE 2014 - Asian Conference on Polymer and Chemical Engineering
Conference, Kuala Lumpur, Malaysia, December 16, 2014
This conference covers different topics related to Chemical
Engineering, Applied Chemistry, Polymer Synthesis and
Specifications, and Polymer Processing.
-
Francis turbine CFD validation workshop
Workshop, Trondheim, Norway, December 15, 2014
Workshop for validation of CFD in Francis water turbines. It
will be repeated with increased complexity.
-
Short Term Training Programme on AN ENGINEERING APPROACH TO COMPUTATIONAL FLUID DYNAMICS
Program, Off N/H - 8, Near Vasad Bus Depot, Vasad, Anand, India, December 15, 2014
The STTP spread over five days aims to cover a wide range of
emerging topics in the rapidly growing field of
Computational Fluid Dynamics. Some of them include:
- Fundamentals of CFD & Applications
- Basic Governing Equations
- Discretization Techniques
- CFD Techniques
- Turbulence Modeling
-
Webinar: Introducing Design and Robust Optimisation with ANSYS DesignXplorer
Online Event, December 11, 2014
Join our webinar to see how ANSYS DesignXplorer can help
you to efficiently answer what-if questions and
understand the relationship between design variables and
the performance of your products.
-
Free Webinar: Modeling Solids Conveying Using the Discrete Element Method
Online Event, December 11, 2014
This webinar will introduce the DEM available within
STAR-CCM+® and its application to particle transport. A
live demonstration will show how a system simulation and
various property parameters of material can both be set
up. Examples will be presented showing the application of
this method to particle transport.
-
IUTAM symposium on multiphase flows with phase change: Challenges and opportunities
Conference, IIT Hyderabad, Kandi, Hyderabad, India, December 8, 2014
While multiphase flows have been well-studied, those
accompanied by phase change have received far less
attention.
There are a few other studies that have done some fairly
sophisticated modeling and simulation of multiphase flows
with
boiling for nuclear reactors. The time is therefore right to
assemble a team of world experts in the field of multiphase
flows to define the scope of the work that must be carried
out
in this area over the next few years.
-
Geometry Simplification in Electronics Thermal Simulations: How Much is Too Much?
Online Event, December 4, 2014
This web seminar will examine this question by comparing
simulation results from an unsimplified model with
results from simulations on progressively simpler models.
The comparisons will help us determine how much detail is
needed based on the requirements and goals of a
particular simulation project so we can obtain the
desired results as quickly as possible.
-
LES4ICE'14
Conference, 1 & 4 avenuie de Bois-Preau, Rueil-Malmaison, France, December 4, 2014
LES4ICE aims at providing a forum of international exchanges
concerning recent advances in Large-Eddy Simulation research
applied to Internal Combustion Engine Flows and related
experimental techniques.
-
Basic OpenFOAM Training for Application Engineers
Course, ESI Group, 502, Pentagon 2, Magarpatta City, Pune, India, December 4, 2014
If you work on Automotive applications like External
Aerodynamics, Underhood, Climate Control (HVAC) simulations
or
Non-
Automotive applications like Wind turbines, Tank sloshing(
Multi-
phase
VOF), Industrial ventilation etc then this training will
help you
to explore OpenFOAM. Even if you are not into these
applications,
we
can still work on a personalized training on your topics.
-
Enhance the reliability of your CFD simulations with the Uncertainty Quantification module!
Online Event, December 3, 2014
Join NUMECA for a FREE webinar in two sessions on December
3
-
Free Simulating Systems Workshop for Powertrain to Reduce Emissions and Fuel Consumption
Workshop, The Baronette Renaissance Detroit-Novi Hotel,, Novi, United States, December 3, 2014
Initiatives shown during this event will focus on the
virtual powertrain simulation to help provide quick and
early design testing, thus reducing cost and time of
development. This workshop concentrates on how simulation
impacts design and how to improve your simulations
through Multidisciplinary Design Exploration.
-
Free Workshop: Flow and Solids Simulation for Oil Sands
Workshop, Ramada Downtown Calgary, Calgary, United States, December 2, 2014
Industry-focused examples provided by the presenters will
demonstrate how computational fluid dynamics (CFD)
simulation is used to improve and optimize equipment
design and aid in the development of more effective and
reliable oil and gas transportation, production and
process systems.
-
HPC Systeme fuer ANSYS Mechanical und CFD optimal konfigurieren
Seminar, Stuttgart, Germany, November 27, 2014
Das Seminar richtet sich an Entwickler und Entscheider,
die Simulationsprogramme im Bereich Strukturmechanik und
Stroemungssimulation anwenden und die beschleunigte
Entwicklung und/oder Optimierung ihrer Produkte durch den
Einsatz von High Performance Computing Systemen effektiv
vorantreiben wollen.
-
ERCOFTAC EU - Best Practice for Eng CFD
Course, CMT-Motores Térmicos, Valencia, Spain, November 26, 2014
This course is targeted at relatively new and improving CFD
analysts in engineering industries and consultancies.
It provides the knowledge to effect a step-change in the
accuracy and reliability of CFD practices across a range of
engineering applications relevant to the power generation,
aerospace, automotive, built environment and turbomachinery
sectors - amongst others.
-
12th Multiphase Flow Conference & Short Corse
Conference, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany, November 25, 2014
Multiphase flows are of great interest to a large variety
of industries. The power generation, nuclear reactor
technology, food production, chemical process, aerospace
and automotive industries are all driving forces in this
complex field.
-
Cooling Electronics with CFD
Online Event, November 20, 2014
See why electronics cooling CFD is different, how it has
evolved and where is it going.
-
SPEIC14: Towards Sustainable Combustion
Conference, Conference Center, Instituto Superior Técnico, Lisbon, Portugal, November 19, 2014
A scientific conference on theoretical, numerical and
experimental Combustion and
related fields, jointly organized by the Portuguese and
Spanish Sections of the
Combustion Institute.
-
Simulation for Marine Applications
Workshop, Aalesund University College, Aalesund, Norway, November 18, 2014
Please join us for a workshop on CFD simulation for
marine applications. This event will highlight the latest
innovations and benefits of computational fluid dynamics
in the marine industry, plus alternatives to physical
testing and empirical methods.
-
Indo-Russian Workshop and Poster Presentation on High Performance Computing for Computer Aided Engineering and Sciences
Workshop, C-DAC, Pune University Campus, Ganeshkhind, Pune, India, November 18, 2014
High Performance Computing is a major industrial and
research tool. Nowadays a vast number of scientific and
technical problems are being studied with the help of
mathematical modeling and simulations on HPC platform.
Considering this into account, a workshop is being organized
to bring together researchers and industry professionals on
a common platform to discuss the importance of HPC
application in the areas of scientific research, product
design and associated cost and time savings.
-
Experimental Fluid Mechanics 2014
Conference, The Bellevue Hotel, Latran 77, Cesky Krumlov, Czech Republic, November 18, 2014
The conference will focus on obtaining overviews of projects
under investigation and experimental and numerical methods
used in the
field of fluid mechanics and thermodynamics.
-
Simulation for Marine Applications
Workshop, Rica Maritim Hotel, Haugesund, Norway, November 17, 2014
Please join us for a workshop on CFD simulation for
marine applications. This event will highlight the latest
innovations and benefits of computational fluid dynamics
in the marine industry, plus alternatives to physical
testing and empirical methods.
-
modeFRONTIER Design Optimisation Workshop
Workshop, The Venture Centre, University of Warwick Science Park, Coventry, United Kingdom, November 17, 2014
Introductory Workshop to modeFRONTIER, the integrated
platform for multi-objective and multi-disciplinary design
optimisation.
-
Simulation of Accurate and Efficient Heat Transfer on Complex Geometries
Workshop, Hartford Marriott Farmington, Farmington , United States, November 14, 2014
This seminar will present the most up-to-date 3D analysis
and efficient heat transfer methods available for
mechanical and electronic system design, including
components and assemblies.
-
Workshop Uncertainty Quantification in CFD
Workshop, Delft, Netherlands, November 13, 2014
The main challenge of performing UQ analysis for
computational fluid dynamics
(CFD) is to minimize the computational costs. TNO has
carried out a study on suitable procedures for UQ in CFD
in cooperation with TUDelft and CWI. This workshop will
present you the highlights of the procedures and
demonstrates the advantages of UQ by 2 examples from
practice.
-
CFD Webinar: The Numerical Tow Tank: How CFD Can Help You Meet EEDI Requirements without Compromising Vessel Speeds
Online Event, November 13, 2014
This educational webinar will showcase how CFD
(Computational Fluid Dynamics) is being used to evaluate
and improve designs to reduce drag from the hull and
appendages and maximize thrust from the propulsion system
in order to reduce the vessel’s energy requirements.
-
OpenSource CFD for industry - high-level development (Implementations with the OpenFOAM technology and C++)
Course, Gothenburg, Sweden, November 13, 2014
The course covers the OpenFOAM directory and code
organization, and how to implement new applications and
libraries such as solvers, turbulence models and boundary
conditions. A crash-course in C++ gives a basic
understanding of the code syntax and object orientation. The
course is given as a hands-on workshop, in a computer lab.
Time is left for the participants to follow on their own
designated and pre-installed computer. The course language
is English.
-
Simulation of Accurate and Efficient Heat Transfer on Complex Geometries
Workshop, Toronto Airport Marriott Hotel, Toronto, Canada, November 12, 2014
This seminar will present the most up-to-date 3D analysis
and efficient heat transfer methods available for
mechanical and electronic system design, including
components and assemblies.
-
ANSYS Advanced Multiphase training
Course, Radisson Blu Royal Hotel, Hammerichgade 1, Copenhagen, Denmark, November 12, 2014
Simulating multiphase flows with particle tracking methods.
-
Gothenburg Region OpenFOAM User Group Meeting
User Conference, Gothenburg, Sweden, November 12, 2014
This mini-conference brings together people using OpenFOAM
in the Gothenburg region. It is up to the participants to
define the Gothenburg region - so far it includes all of
Sweden, Denmark, Germany and Great Britain. The language is
English.
-
OpenSource CFD for industry - basic usage (Efficient use of Linux, OpenFOAM and Paraview)
Course, Gothenburg, Sweden, November 10, 2014
This basic course is mainly based on the Linux operating
system, the OpenFOAM OpenSource CFD toolbox, and the
Paraview visualization software. The course is given as a
hands-on workshop, in a computer lab. The basic procedures
are shown using a projector, and time is left for the
participants to follow on their own designated and
pre-installed computer. The course language is English.
-
Basic OpenFOAM Training for Application Engineers
Course, ESI Group, 502, Pentagon 2, Magarpatta City, Pune, India, November 6, 2014
If you work on Automotive applications like External
Aerodynamics, Underhood, Climate Control (HVAC) simulations
or
Non-
Automotive applications like Wind turbines, Tank sloshing(
Multi-
phase
VOF), Industrial ventilation etc then this training will
help you
to explore OpenFOAM. Even if you are not into these
applications,
we
can still work on a personalized training on your topics.
-
CFD Webinar: Accelerating Clinical Trials with Computational Modeling and Simulation
Online Event, November 6, 2014
This webinar will show the latest advancements in
Computational Modeling and Simulation (CM&S). Presenters
will highlight new tools that are available to help
improve things like bench top tests and in vitro and in
vivo tests. New methods to better handle scale up
challenges and accelerate the clinical trial will also be
discussed.
-
Smarter Way of Working with OpenFOAM
Online Event, November 5, 2014
Learn more about how to increase the ROI with OpenFOAM and
a new intelligent interface for OpenFOAM.
-
LSDYNA CFD Solver Training
Course, Hotel Le Meridian, Pune; Hotel Aloft, Bangalore, Pune & Bangalore, India, November 5, 2014
LSTC launched the powerful CFD solver with NO addition cost.
The training for the same is happening at India 5th Nov 2014
at Bangalore. 7th November 2014 at Pune
-
Oil, Gas and Chemical CFD Conference
Conference, Houston Marriott Energy Corridor, 16011 Katy Freeway, Houston, United States, November 4, 2014
After the success of our inaugural event last year, CD-
adapco is pleased to announce the 2nd Oil, Gas and
Chemical Conference in Houston, TX on November 4th & 5th.
Leading professionals will share their experiences in the
application of CFD in the oil & gas and chemical
industries.
-
CFD Webinar: Designing Better Centrifugal Water Pumps, Faster
Online Event, October 30, 2014
This online event will show you how you can obtain rapid
throughput with your CFD flow simulations of centrifugal
water pumps, set up and perform automated design space
exploration (ADSE), and leverage process automation to
tightly connect STAR-CCM+® for CFD with another code for
designing the pump impeller blades.
-
Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS
Course, Chalmers University of Technology, Gothenburg, Sweden, October 29, 2014
The course will give an introduction to LES and these new
methods. LES, or any of the new approaches, is the first
step when performing accurate CAA (Computational
Aero-Acoustics). Lectures will be given in the mornings; in
the afternoons there will be workshops using Matlab on PC
Workstations.
-
FINE/Marine v4.1: new features webcast!
Online Event, October 29, 2014
Join NUMECA for a FREE webinar in two sessions
-
European Autumn Gas Conference (EAGC) 2014
Conference, Grange St Paul’s Hotel, London, United Kingdom, October 28, 2014
The European Autumn Gas Conference (EAGC) 2014 will attract
business leaders operating within Europe’s gas supply chain
who are looking to adapt and overcome the commercial,
geopolitical and macro-environmental challenges of working
in the region. These include government officials,
regulators, upstream and midstream companies, utilities,
traders and originators, investors and large industrial
energy users.
-
3rd Annual Gas Asia Summit (GAS)
Conference, Marina Bay Sands Hotel, 10 Bayfront Avenue, Singapore 018956, Singapore, United Kingdom, October 28, 2014
Multilateral Cooperation to Connect Gas Markets
-
Free CFD Webinar: Interactive Exploration of High Fidelity ICE Simulations
Online Event, October 28, 2014
Learn how you can create and analyze ICE simulations with
hundreds of time steps and hundreds of thousands of
simulated particles. Interactively explore your high
fidelity data to improve understanding of your results.
Attend this webinar by Intelligent Light and Convergent
Science to see how you can escape current limitations and
achieve more from your CFD.
-
OpenFOAM Master Class Workshop, Anaheim, California - 27th October 2014
Workshop, Embassy Suites Anaheim-South 11767 Harbor Boulevard, Garden Grove, United States, October 27, 2014
This one day course is offered free of charge and will
be held in
conjunction with this years Pointwise User Group Meeting.
The course is
aimed at intermediate and advanced users needing more
understanding of the
basic structure and architecture of OpenFOAM. The workshop
will be presented by Applied CCMs
engineers who have a several decades of combined CFD
experience.
-
Course in "Applied LES, DES and URANS for Industry"
Course, Chalmers University of Technology, Gothenburg, Sweden, October 27, 2014
A three-day course in "Applied LES, DES and URANS for
Industry" will be given at Chalmers, Gothenburg, Sweden,
between 27-29 October 2014.The course will cover three
important applications of CFD techniques in industry:
prediction using unsteady CFD simulations (LES, DES, PANS,
URANS), CFD for flow control and aerodynamic shape
optimization.
-
CFD Webinar: Full Vehicle Thermal Management at Mercedes-Benz: An Example of Simulating Systems
Online Event, October 23, 2014
This online event provides an introduction to simulating
systems and related methods. Attendees will learn the
immense benefits that can be achieved through simulating
the whole system.
-
modeFRONTIER Design Optimisation Workshop
Workshop, The Venture Centre, University of Warwick Science Park, Coventry, United Kingdom, October 22, 2014
Introductory Workshop to modeFRONTIER, the integrated
platform for multi-objective and multi-disciplinary design
optimisation.
-
ERCOFTAC EU - Fluid Structure Interaction with impact on industrial applications, 16-17 October 2014, EDF, Chatou-Paris, France
Course, EDF-Chatou, Paris, France, October 16, 2014
The course engages the Fluid Dynamics and Structural
Mechanics world, to present state-of-the-art methods in
theoretical, experimental and numerical approaches. This
involves FSI phenomena associated with solid structure
rotation, instabilities, vibrations, and separation. A main
goal is to provide state-of-the-art methods for analysing
FSI phenomena, with best practice guidelines. The domains
of applications covers flow and movement induced vibrations
in hydrodynamics and in aerodynamics.
-
Cooling of a Wind Power Station IGBT
Online Event, October 16, 2014
This webinar will introduce the frequency converter for this
specific application, 3D FloEFD thermal calculations of the
IGBT transistor modules will then be presented and compared
with test results.
-
CFD Webinar: Simulating Motion with Ease Using Overset Mesh
Online Event, October 16, 2014
This online event provides an introduction to overset
mesh and related methods such as DFBI. It will provide
you with an insight into modeling complex motion in STAR-
CCM+. The background and applicability, the methods, as
well as some practical examples that illustrate what can
be achieved.
-
Simulation von rotierenden Maschinen
Seminar, Holiday Inn City Centre, Munich, Germany, October 16, 2014
Das Seminar vermittelt Wissen über:
- Bewertung der Betriebssicherheit von Strömungsmaschinen
- Optimierung von Leistungsaufnahme, Wirkungsgrad und
Energiebedarf
- Berechnung des Schwingungsverhaltens von
Maschinenkomponenten
- Gesamtbetrachtung von Strömungsmaschinen durch Fluid-
Struktur-Koppelung
-
Introduction to CFD Principles
Workshop, Wilde Analysis Ltd, Brindley Lodge, Adcroft Street, Stockport, United Kingdom, October 13, 2014
By attending this one-day course, delegates will gain a
solid foundation for the practical elements of
computational fluid dynamics (CFD).
-
23rd International Meshing Roundtable
Conference, Thistle Marble Arch Hotel (http://www.thistle.com/marblearch), London, United Kingdom, October 12, 2014
The 23rd International Meshing Roundtable solicits technical
papers that present original results on meshing, gridding and
related technology for solid mechanics, CFD, visualization,
or any other mesh related analysis purposes.
-
Werner Albring Memorial
Conference, TU Dresden, Dresden, Germany, October 10, 2014
Stroemungstechnische Tagung 2014
anlaesslich des 100. Geburtstags von Werner Albring
-
ERCOFTAC EU - Computational Aeroacoustics, 9-10 October 2014, GE, Munich, Germany
Course, General Electric, Munich, Germany, October 9, 2014
The course provides a proper overview of recent insights of
aeroacoustics theories. A number of practical problems
involving the coupling between CFD’s results and CAA will be
also thoroughly discussed and realistic applications
performed by the instructors will be discussed. Advanced
CAA methods are presented as well as what we can learn from
the direct computation of aerodynamic noise. Finally,
specific topics reflecting participant interests will be
discussed in a final round table session.
-
Basic OpenFOAM Training for Application Engineers
Course, ESI Group, 502, Pentagon 2, Magarpatta City, Pune, India, October 9, 2014
If you work on Automotive applications like External
Aerodynamics, Underhood, Climate Control (HVAC) simulations
or
Non-
Automotive applications like Wind turbines, Tank sloshing(
Multi-
phase
VOF), Industrial ventilation etc then this training will
help you
to explore OpenFOAM. Even if you are not into these
applications,
we
can still work on a personalized training on your topics.
-
FREE Webinar : How to Select your CFD Academic Project ?
Online Event, October 8, 2014
Any academic degree, let it be bachelors or masters, ends
with a project work. The project work is one of the
most critical parts of any academic degree. It is so
important that it always decides what is going to be next
for the student. Let it be higher studies or industrial
job, the whole career path (at least the starting point
of that path) is based on the project work. Talk to the
experts about how to select your CFD academic project in
this FREE Webinar
-
The 2nd OpenFOAM User Conference 2014
User Conference, Steigenberger Hotel, Berlin, Germany, October 7, 2014
ESI-OpenCFD presents the 2nd OpenFOAM User Conference and opens
up another opportunity for all the OpenFOAM users worldwide to
meet and interact with the OpenFOAM developers, support and
training team from ESI-OpenCFD and find more about new
developments and interesting projects in OpenFOAM.
-
CFD Simulation for Improving Aftertreatment Devices
Workshop, DoubleTree by Hilton Hotel Chicago O'Hare Airport - Rosemont, Chicago, United States, October 6, 2014
This event will feature a wide range of advanced topics
related to aftertreatment devices presented by our
technical leads and one of our product managers.
-
Design and Optimization of Turbomachinery using NUMECA CFD
Online Event, October 1, 2014
Join NUMECA for a live presentation!
-
1st International Worshop on CFD and Biomass Thermochemical Conversion, September 30th, 2014, Leipzig, Germany
Workshop, Leipzig, Germany, September 30, 2014
We are delighted to announce the 1st edition of a one-day
international workshop on CFD (Computational Fluid Dynamic)
and Biomass Thermochemical Conversion that will be held at
the DBFZ in Leipzig, Germany on September the 30th, 2014.
-
Simulation in der Medizin und Medizintechnik
Seminar, Aachen, Germany, September 25, 2014
Erfahren Sie auf unserem kostenlosen Informationstag, welche
Moeglichkeiten Ihnen ANSYS in der Stroemungssimulation,
Elektromagnetik und in der Strukturmechanik bietet.
-
Grid Engine User Forum
User Conference, San Jose Marriott, San Jose, United States, September 25, 2014
An opportunity to influence the future development path by
defining and discussing a rich feature set that will be
sure to increase the benefits driven from Grid Engine.
-
Translating CFD Into Reduced Formula Racing Lap Times
Online Event, September 25, 2014
Formula racing teams work in a fast-moving design
environment,
and using Direct CFD tools can translate into reduced lap
times
on the race track.
-
NOFUN 2014 - 2nd Northern germany OpenFoam User meetiNg
User Conference, Haus der Wissenschaften, , Braunschweig, Germany, September 24, 2014
move-csc & the Institute of Scientific Computing,
Technische Universität Braunschweig organize the
NOFUN 2014 in Braunschweig.
The intent of the meeting is to provide an opportunity to
meet and discuss/exchange ideas with OpenFOAM users from the
north-german region. The participants define the extent of
the north-german region.
-
CONVERGE User Group Meeting 2014
User Conference, 1 John Nolen Dr., Madison, United States, September 23, 2014
Join us this coming September for our first annual CONVERGE
User Group
Meeting in lovely
Madison, Wisconsin at Frank Lloyd Wright's Monona Terrace.
-
Virtual Wave Basin: CFD in the Marine & Offshore Design Process
Workshop, Houston Marriott West Loop by The Galleria, Houston, United States, September 23, 2014
If you are involved in the design or operation of offshore
vessels or platforms, we are holding an educational seminar
you shouldn't miss. This seminar will feature presentations
from leading companies in the marine and offshore industry,
as well as experts from CD-adapco.
-
The 9th International Symposium on Numerical Analysis of Fluid Flow and Heat Transfer - Numerical Fluids Symposium 2014
Conference, Rodos Palace Hotel, Rhodes, Greece, September 22, 2014
This is the 9th International Symposium on Numerical
Analysis of Fluid Flow and Heat Transfer - Numerical Fluids
Symposium 2014. The
focus of the symposium is numerical methods for fluid flows
and heat transfer, and related topics.
-
Workshop on OpenFOAM
Workshop, Rodos Palace Hotel, Rhodes, Greece, September 22, 2014
This workshop is associated with the 9th International
Symposium on Numerical Analysis of Fluid Flow and Heat
Transfer - Numerical Fluids Symposium 2014
-
12th International Conference of Numerical Analysis and Applied Mathematics
Conference, Rodos Palace Hotel, Rhodes, Greece, September 22, 2014
The aim of the International Conference of Numerical
analysis and Applied Mathematics (ICNAAM 2014) is to bring
together leading scientists of the international Numerical &
Applied Mathematics community and to attract original
research papers of very high quality. The topics to be
covered include (but are not limited to): All the research
areas of Numerical Analysis and Computational Mathematics
and all the research areas of Applied Mathematics.
-
First International Symposium on Free Surface Flows 2014
Conference, Rhodes, Greece, September 22, 2014
The aim of this symposium is to bring together researchers
interested in free surface flows from all around the world.
We intensively invite interested researchers to participate
in this session by submitting their papers about following
topics:
Free Surface Flows (ONLY):
Mathematical modeling
Scientific Computing and Algorithms
Applications to the Sciences (Offshore, Marine, Sea Waves,
etc.)
Experimental Observations and Applications
Theoretical and Applied aspects
-
OpenFOAM training courses (intro/adv./thermo/programming) accompanying the NOFUN2014
Course, Gauss Computing Centre, Braunschweig, Germany, September 22, 2014
move-csc & the Institute of Scientific Computing,
Technische Universität Braunschweig organize OpenFOAM &
ParaView training courses:
-
Microfluidics : Nanofluidics : Multiscale CFD
Workshop, Shiv Nadar University, Dadri, Near Delhi, India, September 19, 2014
Please join us for a national workshop on
Microfluidics and Nanofluidics near Delhi, India during 19-
21 Sept '14. We are happy to have some highly
accomplished
academician in multiscale CFD domain. Prof. Suman
Chakraborty, A Bhatnagar Awardee will be principal
instructor and speaker in the event.
http://www.iitkgp.ac.in/fac-profiles/showprofile.php?
empcode=bTmVW
Details of confirmed eminent speakers can be found on
following link.
http://snu.edu.in/pdf/Dept-of-Mechanical-Engineering.pdf
-
An Introduction to Comprehensive Multiphase Modeling Capabilities
Online Event, September 18, 2014
Presenters on the September 18 event will show the wide
variety of applications that can be solved using a
multiphase toolset. Examples include, the build-up of ice on
an aircraft wing, the demisting of a headlamp, the transport
of rocks/aggregates, dropping a lifeboat into the sea or the
spray painting of a car.
-
FloTHERM v10.1 New Features Presentation
Online Event, September 18, 2014
The new features available in FloTHERM v10.1 will be
presented and demonstrated.
-
Flow-Noise analysis of a Car's Mirror based on steady RANS simulation
Online Event, September 17, 2014
NUMECA will host a free webinar on September 17 in 2 sessions
-
Simulating Water Pumps and Hydro Turbines for Energy and Power
Online Event, September 16, 2014
In this webinar, you will see and hear about real
application stories from Dr. Edward (Ed) Bennett pertaining
to the design and analysis of water pumps and hydro turbines
such as Francis, Kaplan, and Pelton turbines.
-
modeFRONTIER Design Optimisation Workshop
Workshop, The Venture Centre, University of Warwick Science Park, Coventry, United Kingdom, September 15, 2014
Introductory Workshop to modeFRONTIER, the integrated
platform for multi-objective and multi-disciplinary design
optimisation.
-
Hochschulkurs Berechnung turbulenter Strömungen
Course, TU Dresden, Dresden, Germany, September 10, 2014
The 3-day course is delivered by reknown experts in the
field of turbulence modelling and simulation.
It is held in German !
-
IMA Mathematical Modelling of Fluid Systems
Conference, West of England Univ, United Kingdom, September 10, 2014
Fluid systems are used in machine tool applications,
vehicle control systems, where high power to weight ratio,
accuracy and quick response are required.
-
2014 FLOW-3D Americas Users Conference
User Conference, Courtyard Marriott Downtown Toronto, Toronto, Canada, September 9, 2014
The 2014 FLOW-3D Americas Users Conference will be held
September 9-10, 2014 in Toronto, ON at the Courtyard
Marriott Downtown Toronto. Advanced training for the water &
environmental industry will be held Monday, September 8 at
the conference hotel. All FLOW-3D, FLOW-3D/MP, and FLOW-3D
Cast users, and anyone interested in the FLOW-3D product
suite, are invited to attend the conference.
-
Introduction to CFD Principles
Workshop, Wilde Analysis Ltd, Brindley Lodge, Adcroft Street, Stockport, United Kingdom, September 8, 2014
By attending this one-day course, delegates will gain a
solid foundation for the practical elements of
computational fluid dynamics (CFD).
-
Large Eddy Simulation: Fundamentals, Applications and Best Practice Guidelines
Course, George Begg Building, School of MACE, University of Manchester, Manchester, United Kingdom, September 8, 2014
The course addresses analysis of modern approaches to
turbulence modelling in light of HPC and their applications
to the solution of industrial problems. The course consists
of two parts: theoretical course on advanced CFD approaches
and hands-on training on Code_Saturne using STFC Daresbury
Laboratory super computers. The course will cover
fundamentals of Direct and Large Eddy simulations,
industrial applications, inlet and artificial boundary
conditions and best practice guidelines for CFD.
-
Response Surface Models in Flowmaster
Online Event, September 4, 2014
Demonstration of how to generate robust, portable and
accurate response surface models with Flowmaster.
-
Basic OpenFOAM Training for Application Engineers
Course, ESI Group, 502, Pentagon 2, Magarpatta City, Pune, India, September 4, 2014
If you work on Automotive applications like External
Aerodynamics, Underhood, Climate Control (HVAC) simulations
or
Non-
Automotive applications like Wind turbines, Tank sloshing(
Multi-
phase
VOF), Industrial ventilation etc then this training will
help you
to explore OpenFOAM. Even if you are not into these
applications,
we
can still work on a personalized training on your topics.
-
Free Webinar on Turbomachinery CFD using Ansys Workbench
Online Event, August 31, 2014
Turbomachinery CFD using Ansys Workbench : Design
modeler/Blade editor, Turbogrid, CFX, CFD post
-
FINE/Turbo v9.1-1: new features webcast!
Online Event, August 27, 2014
Join NUMECA for a free webinar on August 27
-
NUMAP-FOAM Summer School 2014
Course, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, August 25, 2014
Faculty of Mechanical Engineering, University of Zagreb,
Croatia announces the eighth edition of the Summer School on
Modelling of Coupled Problems in Applied Physics with
OpenFOAM (NUMAP-FOAM) for graduate students and young
researchers in Zagreb in August and September 2014. The
Programme Chairs are Professor Hrvoje Jasak and Doc. Dr.
Zeljko Tukovic.
-
CFD Optimization with Altair HyperWorks
Online Event, August 20, 2014
Altair's HyperMesh offers morphing technology, a case setup
interface for Altair's CFD Solver AcuSolve and a tight
integration with Altair's HyperStudy, a multi-disciplinary
design study and optimization tool. This allows users to
setup a CFD Optimization or DOE study within HyperMesh and
requires only a minimum knowledge of HyperStudy.
-
Training on FLUENT, CFX and ICEMCFD Softwares
Course, SSM English School,Banashankari 2nd stage.Bangalore, Bangalore, India, August 16, 2014
Industry oriented CFD training.CFD Theory and training on
ANSYS FLUENT ,CFX and ICEMCFD (Hexa).
Week end batch (Classes on Saturday and Sundays)
|
