-
Free Webinar: Exploring New Ways To Build A Stronger Engineering Resume
Online Event, February 25, 2014 Presenters will demonstrate the web-based interactive
training modules and teach attendees how they can learn
valuable CAE and CFD skills through the self-monitored
academic system. Students will see how they can progress
through the complimentary training, from a Basic STAR User,
to an Academic STAR Super User, to even the highest level of
performance as a STAR Platinum Champion!
-
NUMAP-FOAM Winter School 2014
Workshop, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, February 24, 2014 OpenFOAM
-
Free webinar: calculate efficiently the wind flow in urban areas
Online Event, February 21, 2014 You can choose among 6 dates to learn how to:
assess the urban climatic pedestrian comfort of outdoor spaces
estimate and optimize the potential for natural air
ventilation of buildings
calculate wind energy production of urban small turbine
-
Altair Info-Day CFD in Cologne, Germany
Workshop, Cologne, Germany, February 18, 2014 Geringerer Modellierungsaufwand und schneller zum Ergebnis
dank kuerzerer Rechenzeiten.
Mit AcuSolve schneller zum Erfolg
Aufgabenstellungen und Anwendungen Kompakt an einem Tag
-
Weekend course on CFD
Course, SSM Public school,Banashankari,Bangalore, Bangalore, India, February 14, 2014 Industry oriented course on CFD.
Classes on saturday 4 PM to 8 PM.
Sunday 9 AM to 3 PM.
Certification course.
-
modeFRONTIER Design Optimisation Workshop
Workshop, The Venture Centre, University of Warwick Science Park, Coventry, United Kingdom, February 13, 2014 Introductory Workshop to modeFRONTIER, the integrated
platform for multi-objective and multi-disciplinary design
optimisation.
-
Mastering the Challenges of CFD Simulation - Meshing/Complex Geometries
Workshop, Cleveland Marriott East, Warrensville Heights, United States, February 13, 2014 At our Meshing/Complex Geometries workshop (Cleveland), we
will cover the latest surface wrapping and meshing
technologies that eliminate manual repair from the CFD
process.
-
Webinar: 5 Reasons to Use Tecplot 360 EX
Online Event, February 13, 2014 As a CFD or CAE engineer, you may be under increasing
pressure to tackle more complex design problems in less
time. The next version of Tecplot 360 will help you quickly
evaluate complex simulation results, regardless of size, on
your existing engineering workstation.
-
A New Approach to Open CFD
Online Event, February 12, 2014 Join NUMECA for a FREE webinar on February 12th
-
Applied LES, DES and URANS for Industry
Course, Chalmers, Gothenburg, Sweden, February 12, 2014 A three-day course in "Applied LES, DES and URANS for
Industry" will be given at Chalmers, Gothenburg, Sweden,
between 12-14 February 2014.
The course will cover three important applications of CFD
techniques in industry: prediction using unsteady CFD
simulations (LES, DES, PANS, URANS), CFD for flow control
and aerodynamic shape optimization.
-
Mastering the Challenges of CFD Simulation - Heat Transfer
Workshop, Courtyard Columbus Airport, Columbus, United States, February 11, 2014 Our Heat Transfer seminar will present the most up-to-date
3D analysis and efficient heat transfer methods available
for mechanical and electronic system design, including
components and assemblies.
-
CFD Site Assessment with O.F.Wind: Introduction course and User Meeting 11./12.02.2014 in Hamburg
User Conference, Hotel Ambassador, Heidenkampsweg 34, Hamburg, Germany, February 11, 2014 O.F.Wind release 1.4.0 continues to deliver software aligned
with your business objectives, which is imperative when
providing a comprehensive site assessment strategy.
Introduction day: This day is designated for people
working in site assessment and using CFD simulations as well
as for people planning on using CFD.
User Meeting: learn more about the general workflow and the
new features of O.F.Wind 1.4.0, such as the thermal solver
or the automatic hull refinement.
-
Mastering the Challenge of Simulating Complex Geometries
Workshop, 700 Ave Michel Jasmin, Montreal (Dorval), Canada, February 7, 2014 Our staff will demonstrate how automated meshing, integrated
workflow and optimization algorithms of STAR-CCM+ enables
users to perform multiple simulations quickly for design
exploration and optimization studies. This, coupled with our
new token-based licensing system, provides the flexibility
and frame work to run multiple design simulations
concurrently, maximizing the usage of your computer hardware
resources.
-
FREE webinar on "Numerical sea trials for cruise ships and offshore vessels"
Online Event, February 5, 2014 Join NUMECA for a FREE webinar on February 5th!
-
Virtual Vehicle Thermal Management System Analysis
Workshop, Sheraton Detroit Novi Hotel, Novi, United States, January 30, 2014 This workshop will cover the latest technology advancements
for solving modern design and analysis challenges related to
vehicle thermal management. Simulation experts will explore
select topics through presentations, demonstration and
hands-on tutorials.
-
FREE webinar on "Random Vibro-Acoustic analysis of light structures"
Online Event, January 30, 2014 NUMECA will host a FREE webinar on January 30th
-
FREE webinar on "Integrated Aeroelasticity Analysis for Turbomachinery"
Online Event, January 29, 2014 NUMECA will host a FREE webinar on January 29th
-
CFD Simulation for Flow Assurance and Subsea Engineering
Workshop, Houston Marriott West Loop by The Galleria, Houston, United States, January 24, 2014 This seminar will provide a background on the benefits of
engineering simulation to help you gain deeper insights into
the performance of subsea equipment and engineering
challenges.
-
FloTHERM V10.0 - What's New
Online Event, January 23, 2014 Be the first to see the new developments in this latest
major release of FloTHERM V10.0.
-
Smoothed Particle Hydrodynamics (SPH)
Course, University of Manchester, Manchester, United Kingdom, January 23, 2014 The course is aimed at practicing engineers and graduate
researchers in all fields of fluid flow simulation who wish
to discover the latest research and applications in the
novel field of Smoothed Particle Hydrodynamics (SPH). This
course is aimed at the beginner and will cover, basic and
theoretical concepts, latest innovations, applications to
cases in industry and visualisation techniques.
-
9th South African Conference on Computational and Applied Mechanics (SACAM 2014)
Conference, NH Lord Charles Hotel, Somerset West, South Africa, January 14, 2014 The main function of SACAM is to bring together engineers,
scientists and applied mathematicians from academia,
research and industry to encourage scientific engagement
and exchange of ideas in applied mechanics. The
participation of postgraduate students is most welcome and
encouraged.
-
11th International Bhurban Conference on Applied Sciences & Technology (IBCAST)
Conference, National Centre for Physics (NCP), Quaid-i-Azam University, Islamabad, Pakistan, January 14, 2014 It is the largest international scientific event in Pakistan
which is held regularly. In the last ten IBCAST conferences
more than 14 hundred papers have been presented and more
than six thousand participants attended the conference.
Following Seven activities run in parallel:
Fluid Dynamics, Control & Signal Processing, Advanced
Materials, Biomedical Sciences,Medical Sciences, Underwater
Technologies, Wireless Communication & Radar.
-
Eleventh International Conference of Fluid Dynamics (ICFD11)
Conference, Alexandria, Egypt, December 19, 2013 The Eleventh International Conference of Fluid Dynamics is
organized by three Egyptian Universities. The objective of
the conference is to
bring researchers in the areas of fluid dynamics together
for exchange of ideas to foster further development in the
field.
-
Kostenloses Seminar: Stroemungssimulation in rotierenden Maschinen
Seminar, Novotel Muenchen Messe, Germany, December 12, 2013 Stroemungssimulation in rotierenden Maschinen
-
Unsteady analysis of turbomachinery with the Non-Linear Harmonic (NLH) method
Online Event, December 11, 2013 NUMECA will host a FREE webinar on December 11th
-
Cooling of Electrical Machines
Online Event, December 11, 2013 You will see how FloEFD can handle the flow and thermal
calculations of complex geometries like a large electrical
motor.
-
ERCOFTAC: Flow Control Technologies
Course, UK Aerodynamics Centre, Cranfield, United Kingdom, December 9, 2013 Scope:
- Overview of the modern flow control techniques applicable
to aeronautics
- Basic theory and applications of flow control from laminar
to turbulence flows
- Review of current application of various techniques in
controlling momentum, flow noise and heat transfer
- Discussion on the technology transfer issues and future
progress
-
Webinar: Leveraging High Fidelity Simulation and Design Space Exploration to Optimize Pelletizing Kiln Design
Online Event, December 5, 2013 Evaluating multiple designs to determine the optimal
configuration is part and parcel to modern engineering. In
this Webinar you will learn how Tecplot Chorus and CFD++
can be leveraged to address operational difficulties caused
by deposits inside pelletized furnaces.
-
Aerodynamic Analysis Using a Lattice-Boltzmann Method Solver
Online Event, December 4, 2013 Aerodynamic analysis using a Lattice-Boltzmann Method solver
-
ANSYS Simulationsmethoden fuer die Schifffahrt
Seminar, Barcelo Hotel, Hamburg, Germany, December 3, 2013 Rechtzeitig neue Marktpotenziale erschliessen
-
OpenFOAM Seminar Series SCANDINAVIA
Seminar, Oslo, Norway & Stockholm, Sweden, November 27, 2013 ESI invites you to a complimentary OpenFOAM® seminar during
which our experts will share with you their knowledge and
experience of OpenFOAM®.
-
HZDR & ANSYS - 11th Multiphase Flow Conference & Short Course
Conference, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany, November 26, 2013 Multiphase flows are of great interest to a large variety of
industries. The power generation, nuclear reactor
technology, food production, chemical process, aerospace and
automotive industries are all driving forces in this complex
field.
The goal of the conference is to bring together experimental
and numerical practitioners, and to foster discussion and
exchange of knowledge. Experts from both areas are called
upon to present their research and application results to a
worldwide audience.
-
Integrated "CFD - Acoustic" simulation of aero-engine fan noise
Online Event, November 26, 2013 Join NUMECA for a FREE webinar on November 26th
-
Workshop on optimization with PDE constraints
Workshop, Bangalore, India, November 25, 2013 This workshop will provide an introduction to topics in
optimization of
problems governed by partial differential equations
including those involving
shape optimization problems. Theoretical and numerical
aspects of
formulating and solving such problems will be taught.
-
Mastering the Challenge of Simulating Complex Geometries
Workshop, Courtyard Philadelphia Willow Grove, 2350 Easton Rd, Rte 611, Willow Grove, United States, November 22, 2013 We are pleased to announce a complimentary workshop on how
to master simulating complex geometries. If you are a CFD
user and want to reduce simulation process and delivery
times of your simulation projects, you don't want to miss
this event. By attending, you will see firsthand the
benefits of taking CAD directly into CFD simulation without
laborious, manual CAD repair.
-
NAFEMS Computational Aeroacoustics Seminar
Seminar, Heritage Motor Centre, Warwickshire, United Kingdom, November 20, 2013 This is the first one-day NAFEMS Seminar devoted to
Computational Aeroacoustics and CAE methods for noise
propagation and transmission, where Invited speakers from
industry, academia and the leading software providers will
give an insight into noise issues and computational tools
applied to noise abatement in up-front design.
-
Mastering the Challenge of Simulating Complex Geometries
Workshop, Hampton Inn Boston/Natick, 319 Speen Street, Natick, United States, November 20, 2013 We are pleased to announce a complimentary workshop on how
to master simulating complex geometries. If you are a CFD
user and want to reduce simulation process and delivery
times of your simulation projects, you don't want to miss
this event. By attending, you will see firsthand the
benefits of taking CAD directly into CFD simulation without
laborious, manual CAD repair.
-
Experimental Fluid Mechanics 2013
Conference, The Gallery of the Central Bohemian Region - Barborska 53/24, Kutna Hora, Czech Republic, November 19, 2013 The conference will focus on obtaining overviews of
projects under investigation and experimental methods used
in the field of fluid mechanic and thermodynamic.
-
Mastering the Challenge of Simulating Complex Geometries
Workshop, 8600 Esters Blvd., Irving, United States, November 19, 2013 This workshop will cover the latest surface wrapping and
meshing technologies that eliminate manual repair from the
CFD process all together. This guarantees a faster route
from CAD to flow simulation, and frees engineers to
concentrate on engineering analysis.
-
ERCOFTAC - Best Practice for Engineering CFD
Course, CWI, Amsterdam, Netherlands, November 14, 2013 This course is targeted at relatively new and improving CFD
analysts in engineering industries and consultancies.
It provides the knowledge to effect a step-change in the
accuracy and reliability of CFD practices across a range of
engineering applications relevant to the power generation,
aerospace, automotive, built environment and turbomachinery
sectors amongst others.
-
A New Approach to Open CFD
Online Event, November 7, 2013 FREE webinar on November 7th: NUMECA presents a new approach
to Open CFD
-
Integrated Design and Optimization Environment for Turbomachinery
Online Event, November 6, 2013 Join NUMECA for a FREE webinar on November 6th
-
ESI DACH Forum 2013
Conference, RAMADA Hotel Micador, Zum Grauen Stein 1, 65527 Wiesbaden/Niedernhausen, Germany, November 5, 2013 This years ESI DACH Forum will once again unite in three
parallel sessions the topics of Virtual Manufacturing,
Virtual Performance and Virtual Reality.
-
Course "Introduction to OpenFOAM"
Course, Boltzmannstr. 1, 85748 Garching near Munich, Germany, November 4, 2013 This course offered by FluiDyna GmbH in cooperation with the
Leibniz-Rechenzentrum is intended for new users who want to
learn the basic concepts of the usage of OpenFOAM and want
to know how to modify existing applications or add new
functionalities.
-
XFlow General Features Webinar
Online Event, November 4, 2013 Going Meshless: Overcoming the limitations of Traditional
CFD approaches
-
2nd Annual Gas Asia Summit (GAS), Conference & Workshop
Conference, 10 Marina Bay Sands, Singapore 018956, Singapore, Singapore, October 30, 2013 Taking place from 30 October to 1 November as part of
Singapore International Energy Week (SIEW), the 2nd Annual
Gas Asia Summit (GAS) is the leading and only regionally-
focused natural gas and LNG conference within the SIEW.
-
CD-adapco Aerospace Technology Open House
Workshop, 2101 Park Center Drive, Suite 290, Orlando, United States, October 30, 2013 This event is for anyone interested in learning more about
the benefits of engineering simulation for aerospace
applications, including computational fluid dynamics for
aerodynamics, thermal management, and more. Live
demonstrations will cover CAD-to-mesh, solution setup, and
post-processing of a transonic external aerodynamics
problem. The usage of STAR-CCM+ Overset Mesh capability will
also be highlighted.
-
2013 FLOW-3D Korean Users Conference
User Conference, Doksan Novotel Ambassador, Seoul, South Korea, October 29, 2013 The 2013 FLOW-3D Korean Users Conference will be held
October 29, 2013 at the Doksan Novotel Ambassador in Seoul,
Korea. For more information, contact Soft-Tech International.
-
FLOW-3D Japan Users Conference 2013
User Conference, Tokyo Conference Center Shinagawa, Tokyo, Japan, October 25, 2013 This year's FLOW-3D Japan Users Conference will be held
Friday, October 25, 2013 at the Tokyo Conference Center
Shinagawa. A full day of interesting user case studies and
presentations by Flow Science developers will be offered.
The conference is free for all FLOW-3D users in Japan.
-
Open Source CFD International Conference 2013
Conference, Le Royal Meridien, Hamburg, Germany, October 24, 2013 Annual conference with the latest developments in open
source computational fluid dynamics (CFD). The conference
attracts experts from academia and industry.
-
ERCOTAC:Mathematical Methods and Tools in UMQ
Course, ONERA, Chatillon, Paris, France, October 24, 2013 UMQ is a new paradigm in engineering as it aims at taking
into account the many uncertainties affecting the behaviour
of physical systems. Key UMQs can be either operational
and/or geometrical resulting from unknown properties, such
as tip clearances of rotating compressor blades etc. Whether
working from conception into production or operating complex
systems/ processes, commercial success rests on careful
management and control of risk in the face of many
interacting uncertainties.
-
FINE/Acoustics 5.2-1: new features webcast!
Online Event, October 24, 2013 NUMECA will host a FREE webinar on October 24th
-
CFD for sailing boats hydrodynamics: the EmiratesTeam New Zealand Experience
Online Event, October 24, 2013 NUMECA will host a FREE webinar/Live Discussion with Len Imas,
Senior CFD Engineer ETNZ
-
International Workshop on Numerical Prediction of Detached Flows
Conference, Pza. de Cardenal Cisneros, 3, Madrid, Spain, October 23, 2013 We invite researchers from academia and industry to share
their research interests on the prediction and control of
detached flows. Separated flows have a direct impact on
aerodynamic forces and have been, typically, difficult to
predict though numerical tools due to the flow complexity
involved (e.g. prediction of separation point, resolution of
recirculation regions, turbulent modelling).
-
Applied LES, DES and URANS for Industry
Course, Chalmers University of Technology, Gothenburg, Sweden, October 23, 2013 A three-day course in "Applied LES, DES and URANS for
Industry" will be given at Chalmers, Gothenburg, Sweden,
between 23-25 October 2013.
The course will cover three important applications of CFD
techniques in industry: prediction using unsteady CFD
simulations (LES, DES, PANS, URANS), CFD for flow control
and aerodynamic shape optimization.
We believe that the course is useful for engineers and
researcher in all industrial sectors where unsteady flows
are of importance.
-
International CAE Conference 2012 - Call for Papers
Conference, Hotel Parchi del Garda, Verona province (Lake Garda), Italy, October 21, 2013 The International CAE Conference will present the state-of-
the-art of CAE in diverse industries. Significant user
testimonials will prove how such technologies help increase
the product efficiency and ROI. This annual appointment is
a major, an efficient platform for designers, analysts, IT
managers, engineers, professors, researchers, associations
and students involved or interested in virtual simulation
tools.
-
Simulation Open Day
Seminar, Airport House, Purley Way, Croydon, United Kingdom, October 17, 2013 A simulation open day featuring ANSYS software, with an
opportunity to attend a CFD breakout session.
-
Urban Physics Autumn School 2013
Workshop, Anthemus Sea Beach Hotel & Spa, Halkidiki, Greece, October 13, 2013 The Autumn School is designed especially for doctoral
students and postdoctoral researchers and intends to provide
state-of-the-art knowledge in Urban Physics, focused on its
multi-scale, multi-disciplinary and multi-phase character,
including computational modeling and experiments. We look
forward to welcoming you at this Autum School to meet
experts and colleagues working in this exciting field!
-
OpenFOAM User + Advanced training - Oct 2013
Course, Prague, Czech Republic, October 7, 2013 User and Advanced OpenFOAM training course for all who want
to learn/improve using OpenFOAM CFD toolbox.
-
External Aerodynamics Using OpenFOAM
Online Event, October 3, 2013 Do you trust your wind tunnel?
Today, trans-sonic and supersonic flows present CFD analysis
issues because of
their large requirements for processing limiting analysis to
single phase and single
body characteristics, and delays multi-phase, multi-body
analysis until a physical
wind tunnel prototype is available. Join us to learn why
many global manufacturing
companies are switching from commercial codes to OpenFOAM
for external
aerodynamics studies.
-
OpenFOAM IntroductoryTraining, Brisbane, Australia - 3rd & 4th October 2013
Course, Room Q601, QUT, Gardens Point Campus, Brisbane, Australia, October 3, 2013 This two-day hands-on course in Brisbane is designed to
enable CFD practitioners to start using OpenFOAM for
practical computations. The methodology employed consists of
a series of lectures that provide a general understanding of
OpenFOAM topics.
-
Altair Technology Conference 2013
Conference, Hyatt Regency Orange County, 11999 Harbor Blvd., Garden Grove, United States, October 1, 2013 This event brings together hundreds of professionals to
deliver experiences in various industries to provide
best-in-class solutions to the most complex problems in
science, engineering, and business analytics.
-
CFD in Oil, Gas and Chemical Industry
Workshop, Houston Marriott West Loop by The Galleria, 1750 West Loop S., Houston, United States, October 1, 2013 Please join us for our inaugural Oil, Gas and Chemical CFD
Conference in Houston, TX. Learn more about the benefits and
challenges of computational fluid dynamics in the oil, gas
and chemical industries from leading experts in the field!
-
One day short course on ICEM CFD
Course, Department of Mechanical and Aerospace Engineering, IAA, Pakistan, Pakistan, September 26, 2013 One day short course is being arranged by Air University
Islamabad on September 26,2013. This course will cover
basics of geometry handling and creation in ICEM CFD, shell
meshing, tetra and prism meshing and hexa/blocking meshing.
This course is intended to give head start to new users of
ICEM CFD in very less time.
-
Trilinos Workshop on HPC Programming, 25-27 September 2013, Warsaw, Poland
Course, Warsaw, Poland, September 25, 2013 A 3-day course on parallel programming using very effective
and easy to use numerical and mathematical C++ library Trilinos.
-
FREE webinar on 'Wind Tunnel Configuration with AutoGrid5'
Online Event, September 25, 2013 NUMECA is hosting a FREE webinar on September 25th
-
Call for Papers - Italian Society for Climate Sciences, First Annual Conference
Conference, Carlo V Castle, Lecce, Italy, September 23, 2013 The conference, entitled "Climate change and its
implications on ecosystem services and society", aims to
involve scientists, researchers, policy makers, Italians,
and foreigners working in close contact with our country,
whose activities closely affect aspects of climate change
and their relationships on environmental and socio-economic
systems.
-
8th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer
Conference, Rodos Palace Hotel, Rhodes, Greece, September 21, 2013 Understanding fluid dynamics and heat transfer has been one
of the major advances of mathematics, physics and
engineering. Our symposium covers various subjects: from new
numerical methods and fundamental research until engineering
applications.
-
1st Symposium on Dispersed Two-Phase Flows: Dispersion, Deposition and Agglomeration
Conference, Rodos Palace Hotel, Rhodes, Greece, September 21, 2013 The prediction of turbulent dispersed two-phase flows is a
key research issue to many industrial, environmental and
medical applications. The main objective of this symposium
is to provide a frame of the current research on the
numerical simulations or modeling aspects of dispersed
two-phase flows, and to share ideas and valuable results.
-
2013 FLOW-3D World Users Conference
User Conference, The Allerton Hotel, Chicago, United States, September 19, 2013 The 2013 FLOW-3D World Users Conference will be held at the
Allerton Hotel in Chicago on September 19-20, 2013 preceded
by a 1/2 day of free training and poster session at the
opening reception on September 18. We invite you to join
Flow Science staff and FLOW-3D users from around the world
for insightful presentations, engaging conversations and a
chance to pose your questions directly to Flow Science's
developers and support staff.
-
FINE/Marine v3.1: new features webcast!
Online Event, September 18, 2013 NUMECA is hosting a FREE webinar on September 18th
-
FINE/Marine v3.1: new features webcast!
Online Event, September 18, 2013 NUMECA is hosting a FREE webinar on September 18th
-
4th Metacomp Symposium
User Conference, Sheraton Universal Hotel , Universal City, United States, September 17, 2013 User group meeting for CFD++, MIME and CAA++
-
OpenFOAM Seminar and Lessons in OpenFOAM
Seminar, Troy, United States, September 12, 2013 ESI-OpenCFD announces an OpenFOAM Seminar coupled with an
OpenFOAM Lessons Day from September 12 -13, 2013 at the
MSU Management Center in Troy, MI.
-
Coupling modeFRONTIER with JMAG
Online Event, September 12, 2013 The webinar titled "Multi-Objective Optimization for an
Electric Motor Design
Using modeFRONTIER and JMAG", hosted jointly by ESTECO North
America
and Powersys Solutions, will be held on Thursday 12th
September 2013.
-
Plastic Flow 101 - Introduction to Analyzing Plastic Flow
Online Event, September 10, 2013 View this presentation on how to model and analyze non-
Newtonian plastic flow using FloEFD. This presentation
begins with the basics and concludes with a demonstration
of an example model in FloEFD.
-
High Performance Computing Autumn Academy
Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, September 9, 2013 The Autumn Academy is a two-week summer school on all
aspects of HPC. It is highly suitable for researchers from
academia or industry and in particular for new comers in
high performance computing. The Academy will take attendees
through Basic HPC tools, Programming, Performance
Programming, Parallel Architectures, Shared Variables
Parallelism, Message Passing Parallelism and Practical
Parallel Programming.
-
Advanced Methods in Computational Fluid Dynamics
Course, Modelling & Simulation, University of Manchester/STFC Daresbury, Manchester/Warrington, United Kingdom, September 9, 2013 A CPD course on advanced CFD methods delivered
jointly by The University of Manchester (UoM) and Science &
Technology Facilities Council (STFC) UK. The the first part
of the course will be on turbulent flows (RANS, LES & DNS),
fluid-structure interaction, artificial boundary conditions,
compressible flows and Aeroacoustics. The second (practical)
part of the course will be held at the STFC on IBM Blue
Gene/Q machine. This training is devoted EDFs open-source
CFD solver Code_Saturne.
-
Applied LES, DES and URANS for Industry
Course, Chalmers University of Technology, Gothenburg, Sweden, August 28, 2013 A three-day course in "Applied LES, DES and URANS for
Industry" will be given at Chalmers, Gothenburg, Sweden,
between 28-30 August 2013.
-
FREE webinar on 'Ask the expert: FINE/Open with OpenLabs v.3.1-1'
Online Event, August 28, 2013 NUMECA is hosting a FREE webinar on August 28
-
Know More About OpenFOAM® in INDIA
Online Event, August 22, 2013 Mr. Anshul Gupta, Head CFD Operations Asia will provide
insights on OpenFOAM operation in India with some
interesting industry examples and demo of a brand new
intelligent GUI
-
Introduction to CFX
Course, Airport House, Purley Way, Croydon, United Kingdom, August 21, 2013 This course is designed for those interested in the
analysis of fluid motion. Basic knowledge of the ANSYS
interface is beneficial but not required. Prior knowledge
of fluid mechanics and general FE modelling is particularly
useful.
Each course topic is followed by hands on workshops and
exercises
-
CFD Training in Australia and NZ
Course, Engineers Australia, Queensland, Australia, August 20, 2013 Don Computing offers CFD/FEA/Process Modeling/EOR Simulation
training, customized solution, collaboration and consulting.
Don computing offers CFD training at various
Universities/Research Institutes/ International
Hotels/Clients place.
-
OpenFOAM for CFD
Online Event, August 20, 2013 Perhaps you've considered OpenFOAM but were concerned about
analysis
accuracy, a steep learning curve, or scaling across the
team. Join us to learn
about deploying OpenFOAM with a complete CFD framework that
provides a
collaborative GUI as well as virtually unlimited access and
processing capability.
-
International Workshop on Numerical Methods and Modelling for Compressible Multimaterial Flows and Mixing 2013
Workshop, Huayuan road 6#, Beijing, China, August 12, 2013 The series of international workshops on multimaterial
flows and mixing were initiated by the Institute of Applied
Physics and Computational Mathematics (IAPCM) with the
first workshop held in IAPCM, Beijing, China in 2009.
-
Introduction to Reacting Flow Modeling Part 2: Combustion Modeling
Online Event, August 6, 2013 This webinar will provide a glimpse of direct application of
combustion modelling to analyses a chemical process. We will
see how CFD is applied to model reactions and particularly
combustion. The session would give a short overview towards
industrial application of combustion modelling & will also
showcase a case study based on combustion modelling using
commercial CFD code.
-
Know More About OpenFOAM in INDIA
Online Event, August 1, 2013 ESI CFD team in Pune & Bangalore gears up for an interesting
webinar on OpenFOAM® operations in India, Asia.
-
Introducing ESTECO Enterprise Suite
Online Event, July 26, 2013 ESTECO Enterprise Suite will be presented on 26th July
through a free webinar
held by ESTECO's experts.
-
FEA & CFD Simulation Open Day
Seminar, Airport House, Croydon, United Kingdom, July 25, 2013 A simulation open day featuring ANSYS software, with an
opportunity to attend a CFD breakout session.
-
modeFRONTIER 4.5, What's New
Online Event, July 25, 2013 FREE WEBINAR! On July 25th ESTECO's staff will introduce in
details the key
improvements coming with the new release of modeFRONTIER®, the
multidisciplinary and multi-objective optimization platform.
-
Simulation Open Day
Seminar, Airport House, Purley Way, Croydon, United Kingdom, July 11, 2013 A simulation open day featuring ANSYS software, with an
opportunity to attend a CFD breakout session.
-
modeFRONTIER Design Optimisation Workshop
Workshop, The University of Warwick Science Park, The Venture Centre, Coventry, United Kingdom, July 11, 2013 Introductory Workshop to the Multidisciplinary Design
Optimisation and Process Integration Software modeFRONTIER.
-
FREE webinar on 'Integrated CFD - Acoustic simulation of Propellers and Contra Rotating Open Rotors in flight conditions'
Online Event, July 9, 2013 NUMECA International is hosting a FREE webinar on July 9th
-
Compact course on Discontinuous Galerkin method for time-dependent convection-dominant PDEs
Course, Bangalore, India, July 4, 2013 The lectures describe discontinuous Galerkin methods for
solving
time-dependent convection-dominant PDE, including
hyperbolic, convection diffusion, and dispersive wave
equations. Algorithm
formulation, stability analysis and error estimates, and
efficient
implementation will be discussed. Recent developments including
superconvergence, positivity-preserving, and discontinuous
Galerkin methods
for problems involving delta-function in their solutions
will be mentioned
when time permits.
-
Kraken Webinar "Save Time and Money While Pushing Reservoir Data Handling to New Frontiers"
Online Event, July 3, 2013 Do you use reservoir simulators such as ECLIPSE/IMEX?
Join us for a 1 hour free webinar and live demonstration to
see how you can benefit from Kraken.
Register here > http://bit.ly/KrakenWeb13
-
International Conference on Mechanical, Automotive and Aerospace Engineering 2013
Conference, Kuala Lumpur, Malaysia, July 2, 2013 The Faculty of Engineering, International Islamic University
Malaysia is organizing this International Conference on
Mechanical, Automotive and Aerospace Engineering to bring
together researchers and engineering professionals from all
over the globe to meet and deliberate in the beautiful
green city of Kuala Lumpur, during the period July 2-4,
2013.
-
One-week Self-financed Short-term Training Programme on CFD
Program, Department of Applied Mechanics, MNNIT Allahabad., Allahabad, India, July 2, 2013 To improve quality of technical education through manpower
development for effective teaching including the provision
of pedagogical training, a short-term training programme on
Computational Fluid Dynamics (CFD) is planned, which offers
basic to advanced theories of computational fluid dynamics
with intensive laboratory sessions of CFD modeling.
-
Computational Fluid Dynamics Challenge for Rupture-Prediction in Intracranial Aneurysms
Germany, June 29, 2013 Computational challenge in order to predict rupture in two
intracranial
aneurysms
-
Four Decades of CFD: Looking Back and Moving Forward
Conference, The Westin San Diego, 400 West Broadway, San Diego, United States, June 22, 2013 A Symposium Celebrating the Careers of Antony Jameson, Phil
Roe and Bram van Leer
Sponsored by AFOSR and University of Kansas
-
FREE webinar on 'CFD simulations for sailing boats'
Online Event, June 19, 2013 NUMECA is hosting a FREE webinar on June 19th
|