CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > CFD News and Announcements > Message Display

CFD News and Announcements - Message DisplayCFD-Wiki

Post Response | Return to Index | Read Prev Msg | Read Next Msg

Introducing TURBOdesign Suite v6.6 for turbomachinery design and optimization

Posted By: Mehrdad Zangeneh
Date:Thu, 3 May 2018, 11:41 a.m.

The version v6.6 update to TURBOdesign Suite provides significant new features and functionality to enable designers to produce highly optimised designs faster than ever before. Our webinar will highlight the new TURBOdesign Suite functionality, including a performance map prediction for centrifugal pump and centrifugal compressor with real gas and the integration of TURBOdesign Optima with ANSYS Workbench for CFD and FEA computation. The major new functionality included in TURBOdesign Suite v6.6 includes:

Performance map prediction for centrifugal pump: Once the initial 1D design of the pump is completed with TURBOdesign Pre, its analysis mode allows estimating the performance curves for head, efficiency and power for a range of flow rates, for given rotational speeds or impeller outlet diameters. The estimation of the performance curves does not require the creation of a 3D blade geometry.

Performance map prediction for centrifugal compressor with real gas: The centrifugal compressor analysis functionality for single stage compressors without return channel has been extended to allow working with real gas. This enables the user to have an overview of the performance of pressure ratio and efficiency for the different flow rates for given rotational speeds.

Integration of TURBOdesign Optima with ANSYS Workbench for CFD and FEA computation: Since TURBOdesign Suite 6.0.0 TURBOdesignWB has enabled integrating TURBOdesign1 with ANSYS Workbench for CFD and FEA analysis, allowing performing optimization by means of ANSYS DesignXplorer.

In version 6.6.0 this functionality has been extended to include the integration with TURBOdesign Optima , similarly to TURBOdesign Link-CCM+, and has therefore been renamed TURBOdesign Link-WB. This new implementation allows TURBOdesign Optima to drive the optimization process with CFD and FEA computations by using ANSYS CFX and ANSYS Mechanical. The user can launch TURBOdesign Optima integration directly from ANSYS Workbench, automating the setup of TURBOdesign Optima. All of the parameters created by the user within ANSYS Workbench will be made available within TURBOdesign Optima automatically for optimization.

Want to learn more?

Register to our webinar on Thursday 31st May at 9am BST (5pm JST) and 5pm BST (12pm EDT):

Learn what's new in TURBOdesign Suite v6.6. Discover how you can setup an efficient multi-objective and multi-point optimizations using TURBOdesign Suite with CFD and FEA computations by using ANSYS CFX and ANSYS Mechanical. See the new functionality of TURBOdesign Link-WB to drive the optimization process. This webinar is offered several times. Select the time that works best for you.

https://blog.adtechnology.co.uk/introducing-turbodesign-suite-v6.6-for-turbomachinery-design-and-optimization-2


Post Response

Your Name:
Your Email Address:
Subject:
Message:
If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:
Optional Link URL:
Optional Link Title:
If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
Optional Image URL:
If you'd like email notification of responses, please check this box:
 
Post Response | Return to Index | Read Prev Msg | Read Next Msg
Go to top Go to top
CFD-Wiki