|
[Sponsors] |
June 6, 2012, 21:38 |
Mesh Importing Problem
|
#1 |
Member
Join Date: Jan 2012
Posts: 36
Rep Power: 14 |
Hi everyone,
I am new to CFX. I have a question about mesh conversion. I am trying to convert OpenFOAM format mesh to CFX mesh and import the mesh into CFX. I tried to convert OpenFOAM format mesh to Fluent mesh and then imported Fluent .msh file into CFX. The Mesh part became Imported Mesh and it worked. When I tried to do the Setup part, it said application error in CFX-Pre and cannot even show the window of Setup. I am thinking maybe I should convert the mesh to the format of CFX mesh directly. Could anyone give me some advice how to convert OpenFOAM format mesh to CFX mesh. Thank you. Michelle |
|
June 7, 2012, 13:39 |
|
#2 |
Member
Join Date: Jan 2012
Posts: 36
Rep Power: 14 |
I imported the mesh into CFX and then the error message showed up when I tried to open the Setup.
ERROR The importing process reported the following warning(s) while importing the mesh from the requested file: More than 6 faces found for element 99 More than 6 faces found for element 100 More than 6 faces found for element 101 More than 6 faces found for element 102 More than 6 faces found for element 106 More than 6 faces found for element 111 More than 6 faces found for element 113 More than 6 faces found for element 120 More than 6 faces found for element 121 More than 6 faces found for element 128 More than 6 faces found for element 129 More than 6 faces found for element 136 More than 6 faces found for element 137 More than 6 faces found for element 144 More than 6 faces found for element 145 More than 6 faces found for element 152 More than 6 faces found for element 153 More than 6 faces found for element 160 More than 6 faces found for element 161 More than 6 faces found for element 168 More than 6 faces found for element 169 More than 6 faces found for element 176 More than 6 faces found for element 177 More than 6 faces found for element 184 More than 6 faces found for element 185 More than 6 faces found for element 192 More than 6 faces found for element 193 More than 6 faces found for element 200 More than 6 faces found for element 201 More than 6 faces found for element 208 More than 6 faces found for element 209 More than 6 faces found for element 216 More than 6 faces found for element 217 More than 6 faces found for element 224 More than 6 faces found for element 226 More than 6 faces found for element 231 More than 6 faces found for element 235 More than 6 faces found for element 236 More than 6 faces found for element 237 More than 6 faces found for element 238 More than 6 faces found for element 263 More than 6 faces found for element 268 More than 6 faces found for element 272 More than 6 faces found for element 275 More than 6 faces found for element 276 More than 6 faces found for element 279 More than 6 faces found for element 281 More than 6 faces found for element 284 More than 6 faces found for element 290 More than 6 faces found for element 291 More than 6 faces found for element 294 More than 6 faces found for element 300 More than 6 faces found for element 301 More than 6 faces found for element 304 More than 6 faces found for element 310 More than 6 faces found for element 311 More than 6 faces found for element 314 More than 6 faces found for element 320 More than 6 faces found for element 321 More than 6 faces found for element 324 Mor14 LHS 57 34070 4df01 34071 6c e 14 LHS 58 34074 4df01 34070 221b1 e 14 LHS 5e 34071 4df01 134b9 221b2 e 14 LHS 5f 134b9 4df01 34074 221b3 e 14 RHS b e d a e 0 e than 6 faces found for element 330 More than 6 faces found for element 331 More than 6 faces found for element 334 More than 6 faces found for element 340 More than 6 faces found for element 341 More than 6 faces found for element 344 More than 6 faces found for element 350 More than 6 faces found for element 351 More than 6 faces found for element 354 More than 6 faces found for element 360 More than 6 faces found for element 361 More than 6 faces found for element 364 More than 6 faces found for element 370 More than 6 faces found for element 371 More than 6 faces found for element 374 More than 6 faces found for element 380 More than 6 faces found for element 381 More than 6 faces found for element 384 More than 6 faces found for element 390 More than 6 faces found for element 391 More than 6 faces found for element 394 More than 6 faces found for element 400 More than 6 faces found for element 401 More than 6 faces found for element 404 More than 6 faces found for element 410 More than 6 faces found for element 411 More than 6 faces found for element 414 More than 6 faces found for element 420 More than 6 faces found for element 422 More than 6 faces found for element 427 More than 6 faces found for element 429 More than 6 faces found for element 433 More than 6 faces found for element 438 More than 6 faces found for element 455 More than 6 faces found for element 456 More than 6 faces found for element 462 More than 6 faces found for element 469 More than 6 faces found for element 471 More than 6 faces found for element 478 More than 6 faces found for element 480 There was a problem importing the mesh from the requested file. The importing process reported the following problem: Unable to import mesh: Can't generate valid element Could anyone give me some suggestions how to fix this? Thank you. |
|
June 24, 2017, 05:29 |
CFD Module
|
#3 |
New Member
sarah
Join Date: Jun 2017
Posts: 1
Rep Power: 0 |
Hi everyone
I have a major problem with GID, I want to model a couple problem in PFC and GID but when I want to calculate in GID face with an error which says "Problem type 'CFD' can't be found" How could I download CFD module for GID or what should I do? yours sincerely Sarah |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
[ICEM] Problem making structured mesh on a surface | froztbear | ANSYS Meshing & Geometry | 4 | November 10, 2011 08:52 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |