|
[Sponsors] |
July 18, 2012, 02:23 |
Meshing Advice
|
#1 |
Senior Member
Danial
Join Date: Nov 2011
Posts: 179
Rep Power: 14 |
HI
I am doing some solidification modeling in ansys fluent and newbie in fluent too. Could any one please help me to resolve this error; " Model information is incomaptible with incoming mesh" I have attached image also. I have one fluid domain (at top) and second is solid domain. There is interface between them which is defined also by named selection method for each domain.symmetry, opening and wall boundaries along with interface boundary have been chosen by name selection method. Any suggestions please.... Thanks in advance |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] Advice for meshing of corrugated tubes | subsemitonium | ANSYS Meshing & Geometry | 16 | March 4, 2016 02:49 |
[ANSYS Meshing] Meshing Advice ?? | Danial Q | ANSYS Meshing & Geometry | 12 | June 29, 2012 08:13 |
[ANSYS Meshing] Meshing advice needed?? | carolann | ANSYS Meshing & Geometry | 3 | June 26, 2012 05:30 |
DES and LES meshing: tips and advice? | James M | Main CFD Forum | 3 | June 27, 2007 13:43 |
Turbulence Model and Meshing Advice | Jason | FLUENT | 1 | January 31, 2006 13:05 |