|
[Sponsors] |
September 12, 2012, 19:17 |
[ICEM] Problems with meshing in ICEM CFD
|
#1 |
New Member
Join Date: Sep 2012
Posts: 2
Rep Power: 0 |
Hello,
I am trying to mesh some kind of a drilling whole with ICEM CFD (have a look at the picture). I think my blocking should be ok. I created an o-grid to get better angles... As you can see there is some problem with the pre-mesh. The elements at the surface are not generated correctly. It seem as if there is some kind of wrong association between the edges. There is another strange thing: When I generate a scan plane, I can see that the mesh looks better the closer the plane is placed to the end of the drilling whole. At the end of the drilling whole the mesh looks good!! So, the origin of the problem seems to be at the surface. I checked almost everything. Does anyone know what the problem is? Greetz, BENNE Last edited by Benne; September 12, 2012 at 20:33. |
|
September 16, 2012, 19:17 |
|
#2 |
Senior Member
Join Date: Mar 2010
Posts: 181
Rep Power: 17 |
Hi Benne,
did you solve your problem? if not, upload your project files and i can have a look for you! |
|
September 17, 2012, 04:08 |
|
#3 |
New Member
Join Date: Sep 2012
Posts: 2
Rep Power: 0 |
Hej Jonathan,
yes I solved my problem... There were some wrong associations, that I had to fix. But thank you for your help! |
|
Tags |
icem, meshing, problem |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] Very thin plate (0.1mm) ICEM CFD bad meshing | msormania | ANSYS Meshing & Geometry | 1 | April 30, 2012 08:45 |
[ANSYS Meshing] Icem cfd - hexa meshing | arunkumarnd | ANSYS Meshing & Geometry | 9 | April 12, 2012 06:47 |
pipe flow- meshing in ICEM CFD? | Nikhil | CFX | 2 | February 29, 2008 07:14 |
ICEM CFD Meshing Problems: Hexa Dominant | Evan | CFX | 6 | July 3, 2006 13:37 |
Where do we go from here? CFD in 2001 | John C. Chien | Main CFD Forum | 36 | January 24, 2001 22:10 |