|
[Sponsors] |
[ICEM] 2 way FSI, CFX + Mechanical + ICEM, Remesh, Deformation due to fluid flow |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 30, 2013, 09:26 |
2 way FSI, CFX + Mechanical + ICEM, Remesh, Deformation due to fluid flow
|
#1 |
New Member
Binoy
Join Date: Jul 2013
Location: Canada
Posts: 7
Rep Power: 12 |
Hi,
This is my first thread in CFD online. I am new to ICEM. Have been working with Ansys WB 14.5 and CFX for a while. Now i am attempting a 2D, 2 way FSI, with CFX and Mechanical, to simulate a tilt pad thrust bearing with 10 micron min film thickness. While i run the analysis, it exits giving mesh error. I came to know that i need to use remeshing. But, my problem here is that i cannot use remesh option in CFX, as it is a 2 way FSI and the structural deformation is due to fluid flow. I have ICEM, but do not know how to integrate it into WB. I wish to do almost all activities in WB. Also, from these forums i came to know that i need to do scripting in ICEM using TCL, again that i do not know. Can anyone post a remeshing script of ICEM. I will rework back to suit my requirement. Or else please advice. Thanks, Rexyrox |
|
Tags |
2wayfsi, cfx, icem, mech, remesh |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Want Impeller Driven Fluid Flow: What Inlet and Outlet BC to use for Centrifugal Pump | Zev Xavier | FLUENT | 3 | May 9, 2016 06:42 |
Is 2-way FSI valve modeling with seperate fluid domains possible? | Maurosso | FLUENT | 4 | March 7, 2013 08:56 |
ATTENTION! Reliability problems in CFX 5.7 | Joseph | CFX | 14 | April 20, 2010 15:45 |
ICEM 10 mesh scale foe CFX | Korsh Mik | CFX | 2 | October 7, 2005 09:07 |
CFX 4 for two continuous fluid flow solution | sinjae | CFX | 1 | May 19, 2001 03:07 |