|
[Sponsors] |
October 7, 2005, 00:54 |
ICEM 10 mesh scale foe CFX
|
#1 |
Guest
Posts: n/a
|
I tried to use workbench 10 to transfer geometry model to ICEM, produced the mesh in ICEM and obtained the output from ICEM for CFX. But in Workbench and ICEM the units are MM, while CFX thinks the model dimentions are in Meters.
I tried to use scale while output to ANSYS CFX in ICEM, but had no sucsess. It looks like there is an error in output procedure in ICEM. Now we obtain the original CFX "gtm" file, and no choice of units in CFX Pre Could anybody help me? Thnk you. |
|
October 7, 2005, 08:21 |
Re: ICEM 10 mesh scale foe CFX
|
#2 |
Guest
Posts: n/a
|
In CFX-Pre, after you bring in your mesh, you can scale it with a factor of 0.001.
|
|
October 7, 2005, 09:07 |
Re: ICEM 10 mesh scale foe CFX
|
#3 |
Guest
Posts: n/a
|
This a bug with the ICEM CFD export to GTM. ICEM CFD 10.0 will always write the units as meters. You can scale the mesh in Pre after the import.
-Robin |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] CGNS mesh failing in CFX | siw | ANSYS Meshing & Geometry | 5 | November 23, 2017 19:07 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM | kawamatt2 | ANSYS Meshing & Geometry | 17 | December 20, 2011 11:45 |
export mesh made in ICEM to cfx | Morten Andersen | Main CFD Forum | 2 | October 26, 2006 22:52 |
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks ! | Vu Trinh Tuan | CFX | 11 | March 28, 2005 19:04 |