CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] (Design Modeler)Stirred tank Using MRF

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 14, 2013, 02:11
Default (Design Modeler)Stirred tank Using MRF
  #1
New Member
 
Gurpreet
Join Date: Sep 2013
Posts: 16
Rep Power: 13
gurpreet89 is on a distinguished road
dear friends,
i am doing a project on stirred tank (3D geometry) with MRF using Ansys 14.0. i have made the geometry in the design modeler.Actually i myself learnt the design modeler and made the geometry so i dont know whether i followed the correct steps or not because i am not getting the correct solutions in fluent.my geometry is as shown below.




[IMG]http://s21.postimg.org/xjb252sh3/pic2.jpg[/IMG]

First i created the tank then 'cut material' for impeller, baffles and interface then added those as 'add frozen'.

the result i am getting is as such



at the interface, fluid direction changes.
i dont understand where the problem is..plz help
gurpreet89 is offline   Reply With Quote

Old   December 15, 2014, 10:17
Default
  #2
New Member
 
Aniket
Join Date: Dec 2014
Posts: 4
Rep Power: 11
wavalaniket is on a distinguished road
hello,

I am new user of DM. Do you have a complete tutorial for stirred tank reactor? if you have any, Please mail me on waval.aniket3@gmail.com
wavalaniket is offline   Reply With Quote

Old   December 16, 2014, 04:27
Default
  #3
New Member
 
Gurpreet
Join Date: Sep 2013
Posts: 16
Rep Power: 13
gurpreet89 is on a distinguished road
hi,
no i don't have any tutorial on making geometry of stirred tank. you will have to learn basic sketching, plane changing,extruding techniques. those you can find in the first tutorial of ansys guide.
gurpreet89 is offline   Reply With Quote

Old   December 16, 2014, 06:50
Default
  #4
New Member
 
Aniket
Join Date: Dec 2014
Posts: 4
Rep Power: 11
wavalaniket is on a distinguished road
i know how to draw stirrer and reactor but i want to know how to use different operations like Boolean, slice etc. after sketching basic geometry.
wavalaniket is offline   Reply With Quote

Old   December 16, 2014, 19:11
Default
  #5
Senior Member
 
Join Date: Apr 2014
Location: Melbourne
Posts: 584
Rep Power: 14
Kapi is on a distinguished road
You should just go to help section in Ansys workbench and search for all the operations you want to do like Boolean and slice.
In Help section it details what the operation is and how to use it.

Also, I highly recommend you to visit Ansys website>Customer portal and go through tutorials in it, they can help you understand the when, where and how to use these operations


Hope it helps

Cheers
KAPI
Kapi is offline   Reply With Quote

Old   December 17, 2014, 08:33
Default
  #6
New Member
 
Aniket
Join Date: Dec 2014
Posts: 4
Rep Power: 11
wavalaniket is on a distinguished road
Thank you Kapi & gurpreet!!!
wavalaniket is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Design Modeler] Stirred Tank using MRF gurpreet89 FLUENT 2 October 6, 2013 15:02
Stirred tank using MRF dishengbin FLUENT 14 March 13, 2011 23:11
Cfd analysis for design of tank internals ashishpvnit Main CFD Forum 0 March 19, 2010 02:44
Modelling mixing tank using MRF Adi FLUENT 6 November 4, 2009 01:28
Info: Short Course On Thermal Design of Electronic Equipment Arnold Free Main CFD Forum 0 August 10, 1999 11:18


All times are GMT -4. The time now is 19:28.