|
[Sponsors] |
[Workbench] Continue update after solver fails? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 13, 2013, 18:12 |
Continue update after solver fails?
|
#1 |
New Member
Join Date: Oct 2013
Posts: 4
Rep Power: 12 |
For a project I am working on, I have one geometry and mesh that I would like to solve for at a multitude of flow conditions. The easiest way I found to do this is to create many CFX blocks each with a different flow condition, and then use "Update Project" to let it solve the cases overnight.
Unfortunately, due to the instability of the problem, it is expected that some of the solutions will diverge and fail. Is there a way to force workbench to continue solving all of the cases even if one of them fails? Thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rhoCentralFoam solver with Slip BCs fails in Parallel Only | JLight | OpenFOAM Running, Solving & CFD | 2 | October 11, 2012 21:08 |
Quarter Burner mesh with periosic condition | SamCanuck | FLUENT | 2 | August 31, 2011 11:34 |
Working directory via command line | Luiz | CFX | 4 | March 6, 2011 20:02 |
why the solver reject it? Anyone with experience? | bearcat | CFX | 6 | April 28, 2008 14:08 |
Error during Solver | cfd guy | CFX | 4 | May 8, 2001 06:04 |