|
[Sponsors] |
[GAMBIT] varying the position of a turbine inside a 2D vertical cylinder |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 27, 2014, 05:07 |
varying the position of a turbine inside a 2D vertical cylinder
|
#1 |
New Member
amel
Join Date: Oct 2010
Posts: 13
Rep Power: 15 |
Hello
I have to study the effect of the position of a reverse fan placed in a vertical chimney (see figure). could you help me how to modify the position in Gambit. |
|
January 27, 2014, 06:22 |
|
#2 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
display what you already achieved and what you want to build
copy tool should help
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 27, 2014, 07:16 |
|
#3 |
New Member
amel
Join Date: Oct 2010
Posts: 13
Rep Power: 15 |
I have copy the edge corresponding to the turbine for many cases with an increment of 20 m along the chimney but after simulation with Fluent I have concluded that there is no variation in the output power.
|
|
January 27, 2014, 08:23 |
|
#4 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
you have to remesh
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Advice on vertical axis turbine modelling | bramdiff | CFX | 4 | September 28, 2010 04:27 |
[blockMesh] Meshing inside a cylinder so that the edges contain more cells than the center | Bertrand | OpenFOAM Meshing & Mesh Conversion | 1 | April 13, 2010 04:46 |
DPM UDF particle position using the macro P_POS(p)[i] | dm2747 | FLUENT | 0 | April 17, 2009 01:29 |
Help !! Varying Wall position by iteration | J.W.Ryu | FLUENT | 0 | November 20, 2003 20:57 |
Combustion Convergence problems | Art Stretton | Phoenics | 5 | April 2, 2002 05:59 |