[DesignModeler] Automatic fluid volume extraction

vigii · October 7, 2014, 06:50

Hi All,

I have a 3D cad model of inlet manifold. I want to extract the fluid volume from the 3D cad model in ANSYS Designmodeler.

I know there is a way to do this . If someone have experience with this please help me out. Videos, Documents and PDF's are welcomed to resolve this issue.

Regards,
Vigii

Gweher · October 8, 2014, 04:45

Hello Vigii,

You can use the "Enclosure" option in DM to extract the fluid volume. For more info refer to the Enclosure help in the DM User's guide> 3D Modeling> Advanced Features and Tools> Enclosure.

Gwenael

diamondx · October 8, 2014, 23:46

there you go:

https://www.youtube.com/watch?v=Bb8T...UKN8ux3NVjSryg

October 7, 2014, 06:50	Automatic fluid volume extraction	#1
vigii Member Vignesh KPV Join Date: Oct 2011 Location: Bangalore Posts: 83 Rep Power: 14	Hi All, I have a 3D cad model of inlet manifold. I want to extract the fluid volume from the 3D cad model in ANSYS Designmodeler. I know there is a way to do this . If someone have experience with this please help me out. Videos, Documents and PDF's are welcomed to resolve this issue. Regards, Vigii

October 8, 2014, 23:46		#3
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	there you go: https://www.youtube.com/watch?v=Bb8T...UKN8ux3NVjSryg __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 17:22
Simulation of a single bubble with a VOF-method	Suzzn	CFX	21	January 29, 2018 00:58
[blockMesh] Errors during blockMesh meshing	Madeleine P. Vincent	OpenFOAM Meshing & Mesh Conversion	51	May 30, 2016 10:51
FloEFD fluid volume not recognized	Edd	FloEFD, FloWorks & FloTHERM	5	February 8, 2011 23:28
error using combination of step function	xujjun	CFX	1	January 15, 2008 16:46

October 8, 2014, 04:45		#2
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Hello Vigii, You can use the "Enclosure" option in DM to extract the fluid volume. For more info refer to the Enclosure help in the DM User's guide> 3D Modeling> Advanced Features and Tools> Enclosure. Gwenael