|
[Sponsors] |
October 20, 2014, 18:29 |
Mixed mesh for a combustion reactor
|
#1 |
New Member
xha
Join Date: Oct 2014
Posts: 2
Rep Power: 0 |
Hi guys,
I want to generate a mixed mesh for a combustion reactor. The detailed configuration of the reactor is attached in the attachment. A .tin file is also attached. For the eight small nozzles, I want to use tetra and for the rest part (long cylinder), I want to use hexa mesh. How can I achieve this? I got problems when I tried to merge mesh on the interfaces since the interface the nozzles share with the reactor cylinder only occupies a small portion of the cross section of the cylinder, I don't know how to deal with this. Any comment is welcomed. Thank you so much. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
Mesh used for Combustion Simulation | Stein | CFX | 5 | May 14, 2009 18:24 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |