Mesh in ICEM-CFD

cgpa4 · January 24, 2015, 17:13

Hi

I have to do a mesh in ICEM-CFD. I have attached it here. It will have two zones; one is porous and another is Fluid. I have already done the mesh and exported in Fluent but when I check it I get error: Sigment violation. It looks problems in the interface.

It will be a great help if you can give me advice how to improve it.

jpando · January 29, 2015, 11:04

The geometry of the setup looks alright. Make sure you naming conventions are correct. FLUENT will assume a boundary condition, which is not good if you have it labeled like the name of the boundary condition. If you are still having problems, can you attach an image of a cut plan through the middle (lengthwise) of the volume mesh and an image of just the shell elements between the two zone?

cgpa4 · February 1, 2015, 17:06

Quote:

Originally Posted by jpando

The geometry of the setup looks alright. Make sure you naming conventions are correct. FLUENT will assume a boundary condition, which is not good if you have it labeled like the name of the boundary condition. If you are still having problems, can you attach an image of a cut plan through the middle (lengthwise) of the volume mesh and an image of just the shell elements between the two zone?

The problem is solved now. Actually, I made a mistake in faces at the outlet. Thanks for your help and advice

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Import Mesh from ICEM CFD to CFX	Andre Almeida	CFX	16	April 19, 2016 03:42
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
ICEM CFD 5.0 - 2D to 3D Mesh Extrude	James Date	CFX	7	October 22, 2013 03:46
Loading previously saved mesh in ICEM CFD	user0314	ANSYS Meshing & Geometry	1	September 20, 2011 12:46
[ICEM] Problem with volume mesh in ICEM CFD	kolapoasafa	ANSYS Meshing & Geometry	2	September 16, 2011 03:54

January 29, 2015, 11:04		#2
jpando New Member Join Date: May 2012 Posts: 26 Rep Power: 14	The geometry of the setup looks alright. Make sure you naming conventions are correct. FLUENT will assume a boundary condition, which is not good if you have it labeled like the name of the boundary condition. If you are still having problems, can you attach an image of a cut plan through the middle (lengthwise) of the volume mesh and an image of just the shell elements between the two zone?