|
[Sponsors] |
April 15, 2015, 06:41 |
Eductor simulation
|
#1 |
New Member
Richard Gibbons
Join Date: Apr 2015
Posts: 2
Rep Power: 0 |
hello everyone.
my ultimate goal is to simulate a simplified version of a water/air eductor in order to collect the bubble dimensions from the outlet to the top of the water tank (including coalesce of one bubble to another). Using SolidWorks I created the model and I am using the fill command to create the geometry for Fluid. Although when I am trying to create the fluid path inside the pipe, "cannot heal wound" comes up. Second, at the top, the water is supposed to be stopped by a blind flange and escape from the open gap all around the top. although I cannot fill that space fully either. I would greatly appreciate if you give me some help on these issues. Do not hesitate to ask me anything else that I might have missed on the description above Thanks! EDIT: Reading through the sticky, it is mentioned to add the model files if possible. Link to the zip file: https://dl.dropboxusercontent.com/u/17838488/Fluid.rar EDIT 21/04: I have been playing around with other ways of filling up the area in question, with no luck. I would greatly appreciate any help, please Last edited by sharedknowledge; April 21, 2015 at 23:53. Reason: Progress2! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|