|
[Sponsors] |
[ANSYS Meshing] Reduce mesh size only in one direction |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 29, 2016, 13:22 |
Reduce mesh size only in one direction
|
#1 |
New Member
Join Date: Nov 2015
Posts: 5
Rep Power: 10 |
Hi,
I am trying to reduce the size of my 3D mesh using Ansys Meshing. I am reducing the value of the slider of relevance, but it has a very strange behaviour. My first Mesh is about of 4.5 millions of cells, and I want to reduce it at about 500000-600000 elements. When I pass from the value of Relevance of -63 to -62, the mesh size decreases (from about 400000 cells to 230000) instead of increasing. Someone knows a way to control the total number of cells? Thank you everybody, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
[snappyHexMesh] Multi Region Mesh of a car filter | Zephiro88 | OpenFOAM Meshing & Mesh Conversion | 3 | September 11, 2019 19:34 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |