Ansys mesh help required

nikhilm0han · July 15, 2016, 02:33

Hi am trying to do a flow simulation around a missile body..I attached the mesh details what i got ..I wish to know the mesh i got is good enough for analysis ?

mattlevins · July 20, 2016, 16:06

A max skewness of 1 is the poorest quality mesh out there. Also, you have 0 refinement near your boundary layers. I suggest you watch youtube tutorials on external flow simulations

nikhilm0han · July 21, 2016, 05:52

thnx for answering.
could you please suggest any method to improve my mesh quality..can we have an skype call regarding the above

Kapi · July 21, 2016, 18:47

I would suggest to do some tutorials rather asking someone to walk you the way. Its better way of learning!
if you have any issues after that then you can come and ask questions.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
Can you help me with a problem in ansys static structural solver?	sourabh.porwal	Structural Mechanics	0	March 27, 2016 17:07
CFX FSI Fatal Error	unbanana	CFX	0	October 3, 2015 05:57
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

July 20, 2016, 16:06		#2
mattlevins New Member Matt Levins Join Date: Nov 2014 Posts: 17 Rep Power: 10	A max skewness of 1 is the poorest quality mesh out there. Also, you have 0 refinement near your boundary layers. I suggest you watch youtube tutorials on external flow simulations

July 21, 2016, 05:52		#3
nikhilm0han New Member Nikhil Mohan Join Date: Jun 2016 Posts: 2 Rep Power: 0	thnx for answering. could you please suggest any method to improve my mesh quality..can we have an skype call regarding the above

July 21, 2016, 18:47		#4
Kapi Senior Member Join Date: Apr 2014 Location: Melbourne Posts: 584 Rep Power: 12	I would suggest to do some tutorials rather asking someone to walk you the way. Its better way of learning! if you have any issues after that then you can come and ask questions.