|January 31, 2017, 16:16||
Two-way FSI dynamic mesh issue
Join Date: Jan 2017
Posts: 13Rep Power: 2
I wanted to couple transient structural with fluent, but keep having dynamic mesh issue - either 1) update-dynamic-mesh failed: negative cell volume detected or 2) divergence detected in AMG solverressure correction.
Attached link is the rigid body motion I am working on.
Actually my dynamic mesh setting works pretty well when the center hinge is anchored. In contrast, when the center hinge is moving as in the movie, it's very difficult to find an ideal setting for the dynamic remeshing.
I was just wondering if I could address this issue by just changing the dynamic mesh settings (e.g., smoothing, layering, remeshing).
I would appreciate any inputs!
Thank you for your help.
Last edited by khhan0543; February 9, 2017 at 11:26. Reason: Edit the link
|Thread||Thread Starter||Forum||Replies||Last Post|
|Importing Multiple Meshes||thomasnwalshiii||OpenFOAM Meshing & Mesh Conversion||18||December 19, 2015 19:57|
|Regarding Neg Cell Volumes, Dynamic Mesh and Mesh Preview||nettesheim2||FLUENT||0||October 26, 2015 11:46|
|Moving mesh||Niklas Wikstrom (Wikstrom)||OpenFOAM Running, Solving & CFD||122||June 15, 2014 06:20|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|
|Convergence moving mesh||lr103476||OpenFOAM Running, Solving & CFD||30||November 19, 2007 15:09|