[ICEM] Regarding Quality Improvement

anand32 · July 14, 2017, 20:38

Hi All

I am a PhD student and am learning ICEM for my CFD needs.

I have been getting a lot of help and advice from you.

My question to you is:

What are the most pertinent quality metrics which one should watch out for in ICEM Meshes, for say FLUENT solver?

My understanding is Determinant, Angle, Skewness, Aspect Ratio.

Are there any more metrics? Among these, which are more important metrics and should be tackled first? Also, what is your common plan of attack for tackling these metrics?

Let us share our experiences and have a general discussion regarding quality metrics in ICEM Hexa.

Thank you for your time.

ryariyaz · July 14, 2017, 21:08

Orthogonality and skewness is more important. Skewness 0 indicates perfect quality and orthogonal 1 perfect quality

Sent from my Redmi Note 4 using CFD Online Forum mobile app

siw · July 15, 2017, 13:10

My first quality check for hybrid meshes is that the element Quality is below 0.3; except that is for prism elements. Search of the presentations by PSYMN which covers this in detail.

But if you are making Hexa meshes then check the determinant metric. See this ANSYS training video https://www.youtube.com/watch?v=9h1aCuedbGU.

July 14, 2017, 20:38	Regarding Quality Improvement	#1
anand32 Member Vish Join Date: Dec 2016 Location: Purdue University, IN, USA. Posts: 59 Rep Power: 13	Hi All I am a PhD student and am learning ICEM for my CFD needs. I have been getting a lot of help and advice from you. My question to you is: What are the most pertinent quality metrics which one should watch out for in ICEM Meshes, for say FLUENT solver? My understanding is Determinant, Angle, Skewness, Aspect Ratio. Are there any more metrics? Among these, which are more important metrics and should be tackled first? Also, what is your common plan of attack for tackling these metrics? Let us share our experiences and have a general discussion regarding quality metrics in ICEM Hexa. Thank you for your time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Heart modeling - ICEM Hexa Mesh quality improvement	heart_modeller	ANSYS Meshing & Geometry	1	April 8, 2016 08:16
[ICEM] How to improve bad quality elements that are obtained after creating prism layers?	Rohith Giridhar	ANSYS Meshing & Geometry	2	July 11, 2015 18:04
mesh quality improvement	saba.irsh1	Main CFD Forum	0	May 22, 2015 23:16
Mesh quality improvement	anon_a	OpenFOAM	5	February 20, 2012 12:08
Tetrahedral quality improvement - MAXSC2 limit	Ankush Aggarwal	Siemens	1	July 11, 2006 01:10

July 14, 2017, 21:08		#2
ryariyaz New Member Join Date: Dec 2016 Posts: 14 Rep Power: 9	Orthogonality and skewness is more important. Skewness 0 indicates perfect quality and orthogonal 1 perfect quality Sent from my Redmi Note 4 using CFD Online Forum mobile app

July 15, 2017, 13:10		#3
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 733 Rep Power: 25	My first quality check for hybrid meshes is that the element Quality is below 0.3; except that is for prism elements. Search of the presentations by PSYMN which covers this in detail. But if you are making Hexa meshes then check the determinant metric. See this ANSYS training video https://www.youtube.com/watch?v=9h1aCuedbGU.