|
[Sponsors] |
October 16, 2018, 05:44 |
Creating mesh for building
|
#1 |
New Member
Hans
Join Date: Oct 2018
Posts: 2
Rep Power: 0 |
Hello,
I'm working on a project, where I'll be investigating the air distribution at an office with natural ventilation. I have drawn the geometri in DesignModeler and decomposed the geometri, so that (in my oppinion) it should be sweepable, with the floor as source face. Nevertheless, when I go to mesher and press "show sweepable bodies" non are highlighted. I suspect it is due to the windows in the building, but don't know have to decompose differently.. Anyone able to throw some light on this for me?? |
|
October 16, 2018, 05:48 |
Workbench file
|
#2 |
New Member
Hans
Join Date: Oct 2018
Posts: 2
Rep Power: 0 |
Here is the workbench file
|
|
Tags |
ansys 19.1, buildings, cfd, windows |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[mesh manipulation] How to write cellSet for different regions in constant/polyMesh/sets | Struggle_Achieve | OpenFOAM Meshing & Mesh Conversion | 3 | June 17, 2019 10:29 |
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) | Aadhavan | OpenFOAM Meshing & Mesh Conversion | 2 | March 8, 2018 02:47 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 09:54 |
[Commercial meshers] Problems with ANSYS mesh conversion | tdog | OpenFOAM Meshing & Mesh Conversion | 1 | March 31, 2016 18:36 |
[ICEM] Creating unstructured mesh and setting mesh sizes | cfdworks | ANSYS Meshing & Geometry | 0 | February 25, 2014 23:23 |