CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] polyhedral mesh which is generated directly in Workbench Poly Meshing for Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 24, 2019, 22:04
Default polyhedral mesh which is generated directly in Workbench Poly Meshing for Fluent
  #1
Senior Member
 
teguhtf's Avatar
 
teguh hady
Join Date: Aug 2009
Location: Saga, Japan
Posts: 222
Rep Power: 14
teguhtf is on a distinguished road
Dear all,
Do you know the difference between polyhedral mesh which is generated directly in Fluent and generated by Workbench Poly Meshing for Fluent (from ANSYS App Store)?
I face the meshing problem. Usually, I make polyhedral from Ansys meshing by generating tetrahedral mesh then convert it to polyhedral in Fluent Window.
When I make half of the default value in Max Tet Size, Max Face size and min size (to check grid independence) by then converted into Polyhedral with the above steps. But, Now, Ansys meshing fails to work in one part of my geometry. The Ansys Meshing seems to freeze.
I think Workbench Poly Meshing for Fluent (from ANSYS App Store) could be the solution.
Do you have Any Idea about it?
Thank you for your help
__________________
Now Or Never!!!
teguhtf is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh - 3D Wing Meshing Setup & Trials denbjornen OpenFOAM Meshing & Mesh Conversion 1 May 25, 2020 11:14
Trimmer Vs Polyhedral - Drastic fall in data for poly mesh Bharatt STAR-CCM+ 2 December 5, 2017 06:45
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 09:38
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
[ANSYS Meshing] Export Gambit mesh into something Ansys workbench meshing can read? amad11 ANSYS Meshing & Geometry 1 February 21, 2012 12:26


All times are GMT -4. The time now is 10:39.