|
[Sponsors] |
[ICEM] Prism mesh problem for a tube in another tube |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Member
Ftab
Join Date: Sep 2011
Posts: 87
Rep Power: 14 ![]() |
Hi all,
In a geometry where a curved tube is entering another tube, I have hard time generating the prism layer. It is 3D mesh and I put here the cross-section. Please note the mesh in front of tube on the left. https://www.dropbox.com/s/xihx4hsc4k...ture5.PNG?dl=0 Thanks |
|
![]() |
![]() |
![]() |
Tags |
icem, prism layer |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
ICEM cfd 2d tetra mesh with Prism layer Problem | Bmalgil | ANSYS | 0 | March 4, 2018 14:26 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
[ICEM] Can't create prism layer on 2D extruded mesh | PedroC | ANSYS Meshing & Geometry | 19 | April 19, 2011 20:48 |
How to mesh axisymmetric 2D problem using prism... | sameer | CFX | 2 | March 7, 2006 13:14 |