CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] How to fix/repair Zigzag edges

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 7, 2019, 17:55
Default How to fix/repair Zigzag edges
  #1
New Member
 
aki
Join Date: Aug 2019
Posts: 5
Rep Power: 6
zaki21 is on a distinguished road
Hey everyone,

I have imported a geometry which has problematic features, most of which I finally repaired however whatever I do, I can't seem to fix the error on the attachment. It is meant to be a straight edge but it came out zigzagged and it is messing the surfaces up. I have tried all type of repair tools to no avail.

Can someone help me.

Maybe this is because the mesh isn't refined enough? As it is an export of an ANSYS mechanical simulation.

Any ideas are appreciated. Thank you.
Attached Images
File Type: png zigzag edges.PNG (66.9 KB, 13 views)
zaki21 is offline   Reply With Quote

Old   August 12, 2019, 08:07
Default
  #2
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 392
Rep Power: 20
Gweher will become famous soon enough
Hi Aki,



Did you import the geometry through Design modeller or Spaceclaim ?
Gweher is offline   Reply With Quote

Reply

Tags
edge, repair, repair geometry

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh sticking point natty_king OpenFOAM Meshing & Mesh Conversion 11 February 20, 2024 09:12
SimpleFoam & Theater jipai OpenFOAM Running, Solving & CFD 3 June 18, 2019 10:11
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell Arman_N OpenFOAM Meshing & Mesh Conversion 1 May 20, 2019 17:16
[snappyHexMesh] sHM layer process keeps getting killed MBttR OpenFOAM Meshing & Mesh Conversion 4 August 15, 2016 03:21
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 21:11


All times are GMT -4. The time now is 23:37.