[ICEM] Can't convert Pre-Mesh to *.uns file

anand32 · February 28, 2017, 17:37

Hi all

When I try to convert the Pre Mesh to *.uns mesh, I get the following error:

First Error: ..../hex.uns access denied.

Second Error: ......./hex.uns element type out of range

COuld you let me know what this error is ? How to solve it?

Thank you in the anticipation of your help.

Regards

Vishal Anand

bluebase · March 1, 2017, 08:08

Hi Vishal,

regarding your first error... check your writing permissions in your working directory.

With regards,
Sebastian

Tianbao · March 24, 2020, 05:05

The same problem, any solution so far?

bluebase · March 25, 2020, 16:06

Hi Tianbao,

could you explain your problem in more detail? The original post lacks enough details to pin point the problem.

As my previous post, check your current work directory, whether it its writable with your account.

February 28, 2017, 17:37	*Can't convert Pre-Mesh to .uns file**	#1
anand32 Member Vish Join Date: Dec 2016 Location: Purdue University, IN, USA. Posts: 59 Rep Power: 13	Hi all When I try to convert the Pre Mesh to *.uns mesh, I get the following error: First Error: ..../hex.uns access denied. Second Error: ......./hex.uns element type out of range COuld you let me know what this error is ? How to solve it? Thank you in the anticipation of your help. Regards Vishal Anand

March 1, 2017, 08:08		#2
bluebase Senior Member Sebastian Engel Join Date: Jun 2011 Location: Germany Posts: 566 Rep Power: 20	Hi Vishal, regarding your first error... check your writing permissions in your working directory. With regards, Sebastian aligfaisal likes this.

March 24, 2020, 05:05		#3
Tianbao New Member China Join Date: May 2017 Location: Aalborg University Posts: 2 Rep Power: 0	The same problem, any solution so far? aligfaisal likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] funkyDoCalc with OF2.3 massflow	NiFl	OpenFOAM Community Contributions	14	November 25, 2020 03:30
[swak4Foam] swak4foam building problem	GGerber	OpenFOAM Community Contributions	54	April 24, 2015 16:02
Trouble compiling utilities using source-built OpenFOAM	Artur	OpenFOAM Programming & Development	14	October 29, 2013 10:59
[swak4Foam] build problem swak4Foam OF 2.2.0	mcathela	OpenFOAM Community Contributions	14	April 23, 2013 13:59
[swak4Foam] funkySetFields compilation error	tayo	OpenFOAM Community Contributions	39	December 3, 2012 05:18

March 25, 2020, 16:06		#4
bluebase Senior Member Sebastian Engel Join Date: Jun 2011 Location: Germany Posts: 566 Rep Power: 20	Hi Tianbao, could you explain your problem in more detail? The original post lacks enough details to pin point the problem. As my previous post, check your current work directory, whether it its writable with your account.