[ram881973]

Can any one please explain why the axis of the (x axis -green,y axis -blue z axis -red) model is not matching with the triad axis (x axis -red, y axis -green,z-axis blue).Attacment is enclosed for your reference from ansys design modeller.

ram

[PSYMN]

Red is X, Green is Y and Blue is Z.

The triad in the middle of your screen is the local coordinate system relative to that sketch plane… The one in the bottom right corner is the global system…

The sketch plane can be at any angle, but its plane is the local XY for the sketch…

You started the sketch in the Global XZ plane, so its local XY lines up with your global XZ… Make sense?

[ram881973]

ThankQ very much Mr. Simon for clearing the concept

Ram

[Marcus081]

Hi, I have been using the version of ansys 12.1, and the coordinate system appears with these component (v, w, x) , I have not found the form to change it a (x, and, z), since I can do it?

[vstram]

Originally Posted by Marcus081

Hi, I have been using the version of ansys 12.1, and the coordinate system appears with these component (v, w, x) , I have not found the form to change it a (x, and, z), since I can do it?

Hello Marcus,

I'm also having the same problem (triad showing vwx, instead of xyz ), but with the Ansys Mechanical 13.0 instead!

Can anyone help us?

vstram

[Darren Leong]

Originally Posted by vstram

Hello Marcus,

I'm also having the same problem (triad showing vwx, instead of xyz ), but with the Ansys Mechanical 13.0 instead!

Can anyone help us?

vstram

Hi all,

Having the same problem here too. However, this seems to only occur in Windows 7. I have the same ansys 12.1 on Windows XP also; axis system displays correctly in that os.

Appreciate if someone can look into this =) [there's nothing in ansys help doc on it]

Dazza

[krweisbrod]

Hi,
I had the same problem with the origin appearing with a VWX axis instead of XYZ. Also DesignModeler did not show the correct dimension labels in the "Details" area. As one point, I received a message that the video driver needed to be updated. A default Microsoft Windows driver was in use. I replaced it with the current driver for the NVIDIA Quadro FX 580 Display adapters and both problems went away.

Hope that helps.
Kirk

[ettehadi]

[QUOTE=Marcus081;245865]Hi, I have been using the version of ansys 12.1, and the coordinate system appears with these component (v, w, x) , I have not found the form to change it a (x, and, z), since I can do it?[/QUOTE


I have same problem could you please let me know how can I get rid of it if you solved this issue

[ettehadi]

[QUOTE=ettehadi;423596]

Originally Posted by Marcus081

Hi, I have been using the version of ansys 12.1, and the coordinate system appears with these component (v, w, x) , I have not found the form to change it a (x, and, z), since I can do it?[/QUOTE


I have same problem could you please let me know how can I get rid of it if you solved this issue

could you please let me know how could you solve this problem if you did

[ettehadi]

Originally Posted by krweisbrod

Hi,
I had the same problem with the origin appearing with a VWX axis instead of XYZ. Also DesignModeler did not show the correct dimension labels in the "Details" area. As one point, I received a message that the video driver needed to be updated. A default Microsoft Windows driver was in use. I replaced it with the current driver for the NVIDIA Quadro FX 580 Display adapters and both problems went away.

Hope that helps.
Kirk

please give more detail about how you did this. I have the same problem and I cannot get out of it. please inform me with more explanations

[krweisbrod]

Originally Posted by ettehadi

please give more detail about how you did this. I have the same problem and I cannot get out of it. please inform me with more explanations

I believe what I did was download the latest driver for the video card display supplier (NVIDIA). I then accessed the Device Manager and Updated the Driver. Since then I've updated to Workbench Release 14.0.

[Rojj]

Try this

Create an ANSYS Registry entry to correct this issue:
[Note: This is NOT the Windows registry]

1. Exit all Ansys applications.

2. Start the Ansys registry editor
C:\Program Files\ANSYS Inc\{version}\Framework\bin\{platform}\AnsRegEdit. exe

3. Navigate the the following folder:
Software/ANSYS,Inc/{version}/APFramework/AddIns

4. Create a new entry as follows:

Name : SingleCharCall
Type : Int32
Value: 1

[Please make sure that you type uppercase/lowercase of the name exactly as shown.]

5. Exit the Ansys registriy editor.

Hope this helps

[dreamz]

Originally Posted by Rojj

Try this

Create an ANSYS Registry entry to correct this issue:
[Note: This is NOT the Windows registry]

1. Exit all Ansys applications.

2. Start the Ansys registry editor
C:\Program Files\ANSYS Inc\{version}\Framework\bin\{platform}\AnsRegEdit. exe

3. Navigate the the following folder:
Software/ANSYS,Inc/{version}/APFramework/AddIns

4. Create a new entry as follows:

Name : SingleCharCall
Type : Int32
Value: 1

[Please make sure that you type uppercase/lowercase of the name exactly as shown.]

5. Exit the Ansys registriy editor.

Hope this helps

Thanks a lot...!!! This worked...!! Really nice and easy...!

[Amod_k]

Originally Posted by Rojj

Try this

Create an ANSYS Registry entry to correct this issue:
[Note: This is NOT the Windows registry]

1. Exit all Ansys applications.

2. Start the Ansys registry editor
C:\Program Files\ANSYS Inc\{version}\Framework\bin\{platform}\AnsRegEdit. exe

3. Navigate the the following folder:
Software/ANSYS,Inc/{version}/APFramework/AddIns

4. Create a new entry as follows:

Name : SingleCharCall
Type : Int32
Value: 1

[Please make sure that you type uppercase/lowercase of the name exactly as shown.]

5. Exit the Ansys registriy editor.

Hope this helps

Thanks a lot sir...It worked

[mcuneytk]

Hi;
How can I show or hide triad ( on mesh interface ?
I check mesh interface but couldnt find anything.
Thanks.