|
[Sponsors] |
[DesignModeler] Drag Forces acting on Multiple Cyclists in Fluent 2021 R2 |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
October 14, 2021, 19:24 |
Drag Forces acting on Multiple Cyclists in Fluent 2021 R2
|
#1 |
New Member
Lance
Join Date: Oct 2021
Posts: 2
Rep Power: 0 |
Hello, I am a beginner in Ansys Fluent. My geometry is 6 cyclists lined up one behind the other in a straight line inside an enclosure, as shown in the image below.
My task is to determine the Drag Force acting on each of the cyclists, given an airflow travelling in the positive x direction, into the inlet and exiting the outlet. The other four sides of the enclosure are walls. My approach would be to create a named selection for each cyclist, and then later create a Drag Force report for each named selection. Is this approach correct? If so, should named selections be made for each cyclist Part? Or should boolean subtraction be performed first so that only the interfaces between the enclosure and each cavity are named selections? In DesignModeler, I have tried boolean subtracting the 6 cyclist Parts from the enclosure, but doing this created a single Part with 6 cavities inside which are difficult to select. I have read through multiple questions on the forum and other resources, but I still do not know what to do. Any guidance would be very much appreciated. Thank you. |
|
Tags |
boolean subtract, designmodeler, drag, enclosure, fluent |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
postprocessing forces in dpm FLUENT | kharnabnew | ANSYS | 1 | October 3, 2024 13:13 |
The CoP Does not exist: Validating Aerodynamic forces through a "line of action" | ds4719 | Main CFD Forum | 14 | February 18, 2022 19:05 |
direction vectors for lift and drag in fluent | nauman55 | FLUENT | 7 | September 23, 2020 15:47 |
Residuals and forces spiraling out of control before failing | edomalley1 | OpenFOAM Running, Solving & CFD | 3 | September 7, 2018 11:42 |
Ishii-Zuber drag in Fluent | CeesH | Fluent UDF and Scheme Programming | 7 | March 16, 2017 10:52 |