CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Rotating 2d domain to get 3d domain and creating o grid faces

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   January 9, 2022, 10:43
Default Rotating 2d domain to get 3d domain and creating o grid faces
New Member
Join Date: Jan 2022
Posts: 1
Rep Power: 0
ozkanalialperen is on a distinguished road
Hello everyone,

I have axisymmetric blunt bullet shape geometry. I blocked geometry like in this 2d_blocking.jpg file. Then, created 2d surface meshes as in 2d_half_pff_domain.jpg and close_view_blunt_bullet_shape.jpg.
When i rotated this domain into 3d i get following.3d_full_domain_rotated.jpg

I need to create o grid faces at sides of pff, base and nose region of bullet. I tried o grid but i got 3d_full_domain_ogrid.jpg this shape.

Can anyone help me to fix and get proper o grid faces to improve mesh.

Thanks to all from now.
ozkanalialperen is offline   Reply With Quote


icem 2d blocking, icem 3d blocking, icem ogrid blocking hexa

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Suggestions for improving grid quality while creating hybrid grid isit12 Pointwise & Gridgen 3 September 14, 2021 00:27
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) Aadhavan OpenFOAM Meshing & Mesh Conversion 2 March 8, 2018 01:47
[] Foam-extend-3.1 on RHEL: mesh problem lxwd OpenFOAM Installation 4 March 25, 2017 16:10
Problem with building geometry - concentric cylinders Rhoddwen OpenFOAM Pre-Processing 9 December 17, 2014 10:02
Cluster ID's not contiguous in compute-nodes domain. ??? Shogan FLUENT 1 May 28, 2014 15:03

All times are GMT -4. The time now is 00:21.