CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Contact Region and Interfaces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 30, 2022, 06:21
Arrow Contact Region and Interfaces
  #1
New Member
 
Ímer Bora Şahin
Join Date: Nov 2022
Posts: 1
Rep Power: 0
auxo is on a distinguished road
Hello, I was trying to simulate a Savonius Turbine. I create 2 interface, interface 1 and interface 2 for rotor and fluid domain. However, when I try to mesh it automatically creates contact region and also I am using Parameter Set, so everytime I change the parameter and update it, there is an error about contact region. I want to delete this part and I don't want it to automatically creates new one. How can I do that? Or is there a way to simulate it with parameter set and the contact region?
Thanks for your help.
auxo is offline   Reply With Quote

Reply

Tags
2d simulation, contact region, interface domains, mesh 2d, savonius rotor

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] splitMeshRegions does not create interface patch between regions fsan OpenFOAM Meshing & Mesh Conversion 10 June 6, 2022 05:56
Problems in adding interfaces to an overset mesh. william.z STAR-CCM+ 2 April 21, 2020 09:08
Adding turbulence intensity source in separate region Haeussti6 STAR-CCM+ 5 September 11, 2019 09:27
[snappyHexMesh] SnappyHexMesh/splitMeshRegion : region1 in zone "-1" GuiMagyar OpenFOAM Meshing & Mesh Conversion 1 September 10, 2019 09:59
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 18:57


All times are GMT -4. The time now is 23:30.