 |
 |
 |
|
|
|
[Sponsors] | ||||
[BladeModeler] Exporting points in the .rtzt format from DesignModeler/BladeModeler |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 13, 2023, 06:47
|
Exporting points in the .rtzt format from DesignModeler/BladeModeler
|
#1 |
|
New Member
KristianRanta
Join Date: Oct 2016
Location: Sundsvall
Posts: 25
Rep Power: 9  |
I am trying to export the meanline profile of the CAD blade in the .rtzt format that can be read by BladeGen. The ExportPoints options (see picture) in the BladeGen seems to allow exporting the profile in the required format. However, I am unsure what the Blade option highlighted in yellow requires. The turbosystems guide describes this option as below, which is not particularly helpful.
Code:
[Blade feature selection] Select a blade to indicate the blade row for which data is to be exported |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem using AMI | vinz | OpenFOAM Running, Solving & CFD | 298 | November 13, 2023 08:19 |
| Creating User Defined Solver Format for exporting Grids | JamesDoesCFD | GridPro | 1 | August 29, 2017 07:17 |
| [snappyHexMesh] .STL: non-closed manifold surface | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 32 | November 25, 2016 03:15 |
| [snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
| Specifying BC points of unstructured grid in NASTRAN format | nba1942 | Pointwise & Gridgen | 7 | July 31, 2014 12:42 |
Linear Mode
