CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] One or more entities failed to mesh. The mesh of the bodies containing these entities

Register Blogs Community New Posts Updated Threads Search

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old   February 26, 2024, 13:37
Default One or more entities failed to mesh. The mesh of the bodies containing these entities
  #1
New Member
 
Emmanuel Quayson-Sackey
Join Date: Feb 2024
Posts: 3
Rep Power: 2
Quayson-Sackey is on a distinguished road
I am trying to mesh a 3D wind turbine blade in ANSYS MESHING.

I created the 3D wind turbine blade with twist by using the rotation command at the aerodynamic center of the airfoil .

I also created a C type domain around the blade and extracted the blade using the Boolean technique.

I keep getting this error whenever i mesh the domain .
Whenever to see show the problem, it indicates red on the edge of the geometry. I have changed the blade dimensions but to no avail. I am using 2 sections of NACA 64-618 at the very tip of a NREL 5MW wind turbine.
Attached Images
File Type: jpg blade tip after loft.jpg (19.8 KB, 4 views)
File Type: png failed mesh.PNG (142.9 KB, 6 views)
File Type: png geometry.PNG (15.0 KB, 4 views)
File Type: png blade tip after loft 1.PNG (40.1 KB, 4 views)
Quayson-Sackey is offline   Reply With Quote

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel U.Golling OpenFOAM Running, Solving & CFD 52 September 23, 2023 04:35
[ANSYS Meshing] One or more entities failed to mesh. bjkozn ANSYS Meshing & Geometry 2 October 24, 2018 08:22
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
Problems installing OpenFOAM 2.3.0, 1.6-ext and foam-extend 3.0 sam.ho OpenFOAM Installation 35 April 5, 2014 16:31
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 19:24.