 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] One or more faces with map mesh controls failed to be mapped mesh. |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 11, 2024, 15:53
|
One or more faces with map mesh controls failed to be mapped mesh.
|
#1 |
|
New Member
Join Date: Apr 2024
Posts: 1
Rep Power: 0  |
I am having trouble with a part of my geometry regarding Face Meshing. I meshed a geometry and it worked fine (Right_mesh.PNG), showing how the mesh should be (quad elements). When I changed the geometry by increasing the arc of the curved part and redid exactly what I did for the successful mesh, I got this: Wrong_mesh.PNG, the mesh is all unstructured.
I've used Virtual Topology to separate the faces, and it worked for all except for this curved face. Does anyone know how I could solve this? Thanks in advance! 
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Paraview 5.10.1 - error - openfoam 11 - ubuntu 22.04 lts | gu1 | OpenFOAM Bugs | 5 | July 29, 2024 10:50 |
| [snappyHexMesh] SnappyHexMesh/splitMeshRegion : region1 in zone "-1" | GuiMagyar | OpenFOAM Meshing & Mesh Conversion | 3 | August 4, 2023 12:38 |
| Decomposing meshes | Tobi | OpenFOAM Pre-Processing | 22 | February 24, 2023 09:23 |
| [snappyHexMesh] SHM is not extruding/adding Layers everywhere | matthiasd | OpenFOAM Meshing & Mesh Conversion | 2 | October 16, 2016 16:45 |
| [snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
Linear Mode
