|
[Sponsors] |
March 13, 2011, 08:05 |
Problem with hexa mesh refinement
|
#1 |
New Member
John
Join Date: Mar 2011
Posts: 2
Rep Power: 0 |
Hi everybody,
I'm creating a mesh into an S-duct (first image) using hexa elements and O-grid blocking (second image). My problem comes when I refine the premesh and try to convert it into Unstruct Mesh. Under a grade of refinement I always get the error shown in the third image and the mesh is not generated. I don't know why does it appear because all the pre-mesh quality histograms are ok. I appreciate any suggestion. Thanks geometry.jpg O_grid.jpg error.jpg |
|
March 14, 2011, 16:15 |
|
#2 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
It looks like an i/o error (nothing to do with the mesh its self).
Do you have write permission in the folder you are working? Have you saved your project? Check that it is where you think it is... |
|
March 18, 2011, 10:04 |
|
#3 |
New Member
John
Join Date: Mar 2011
Posts: 2
Rep Power: 0 |
Thank you very much Simon, I have changed the directory which was in a network to a local machine one and now it works.
Thank you. |
|
Tags |
error, hexa mesh, mesh generation, o-grid |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 20:43 |
ICEM hexa mesh tutarial 2d car problem | cfduser | Main CFD Forum | 0 | March 8, 2008 17:13 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 15:09 |
Mesh Refinement | JY | Siemens | 7 | September 19, 2002 14:37 |