CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS

Error in rigid body simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 2, 2013, 13:06
Default Error in rigid body simulation
New Member
Johnny Saenz
Join Date: Jun 2013
Posts: 1
Rep Power: 0
scarebyte is on a distinguished road
Hi, In a ridid body simulation I get the next problem.

* Point 90 : 264.494074 226.399433 -93.291688 Normal -0.000000 0.998185 0.060215 Violation -8.958018e-011 NormalVel -3.993559e-012 -7.923145e-012 1 2 734 997 00
* Point 91 : 264.494074 226.639598 -93.883704 Normal -0.000000 0.758020 0.652231 Violation -1.841433e-010 NormalVel -2.027420e-012 -4.012020e-012 1 2 734 997 00
Murty algorithm failed, trying PSOR
Small pivot found during PSOR LCP solve
PSOR algorithm failed, Abort

No set of active contact stops can satisfy all the constraint equations. Solve cannot proceed

Solve failed
Error found at time 2.800000e-001

Solution terminated before normal completion

Total number of time steps: 7
Average time step: 0.04

Number of rejected time steps: 0
Number of discontinuities: 0
Number of saved transient configurations: 8
Maximum relative error: 1.48466e-011 (%)

End of Transient Simulation. CPU Time 31.1406 Elapsed Time 129.214

Analysis of model redundancies:
Joint Revolute - DPMPLink-1 To FD-1 shows some constraint redundancies
Z Translation constraint equation was at time redundant
X Rotation constraint equation was at time redundant
Y Rotation constraint equation was at time redundant

The simulation is from 0 to 5 seconds. It only solves 8 steps aprox.
DPMPLink-1 To FD-1 joint detail is attached and solution configuration.

Attached Images
File Type: jpg ask1.jpg (96.2 KB, 4 views)
File Type: jpg ask2.jpg (96.5 KB, 4 views)
scarebyte is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rigid body + remeshing error in redefining the rigid body updated-initial conditions Pat84 CFX 27 August 30, 2022 12:25
Rigid body Birkov CFX 4 May 25, 2012 07:26
Rigid body - pivoting about a fixed point Catenary CFX 0 April 26, 2012 03:07
LES simulation of bluff body at Re(d)=1200 arash_nl FLUENT 0 June 1, 2009 14:16
rigid body motion antonello FLUENT 3 July 28, 2004 04:25

All times are GMT -4. The time now is 15:15.