CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Ansys Matlab integration: 'propeller blade shape optimization'

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 21, 2015, 17:16
Default Ansys Matlab integration: 'propeller blade shape optimization'
  #1
New Member
 
Join Date: Nov 2015
Posts: 2
Rep Power: 0
usamatoson is on a distinguished road
I am trying to make a 'propeller blade shape optimization'. My optimizer is a Matlab code that takes the objective function (blade efficiency) and give the design parameters (blade geometry), whereas the simulator is Ansys Fluent which needs the design parameters (blade geometry) to perform the simulation and results in the objective function.

My problem is how to automate this cycle?
I made an initial simulation on Fluent, so now I have an Ansys project system(Geometry,Mesh,Setup,Solution,Results and parameters). I need a Matlab command to open this project, update the parameters(geometry), hence update the project, and deliver the output(force,torque=>efficincy) back to Matlab.

Any help will be greatly appreciated
Attached Images
File Type: png Project.PNG (11.1 KB, 22 views)
usamatoson is offline   Reply With Quote

Old   November 22, 2015, 06:16
Default Ansys Matlab integration
  #2
New Member
 
Join Date: Nov 2015
Posts: 2
Rep Power: 0
usamatoson is on a distinguished road
Hello everyone,
I am trying to make a 'propeller blade shape optimization' for my master degree.

My problem is how to automate the optimization between Matlab and Ansys?
I made an initial simulation on Fluent, so now I have an Ansys project system(Geometry,Mesh,Setup,Solution,Results and parameters). I need a Matlab command to open this project, update the parameters(geometry), hence update the project, and deliver the output back to Matlab.

Any help will be appreciated.
Attached Images
File Type: png Project.PNG (11.1 KB, 6 views)
usamatoson is offline   Reply With Quote

Reply

Tags
ansys, command line, integraion, matlab

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Single propeller blade in SRFSimpleFoam brownmj OpenFOAM Running, Solving & CFD 8 July 12, 2021 09:55
Ansys CFX Turbogrid, Problem with blade leading edge sitting on hub at inlet Irondome CFX 9 August 18, 2016 18:56
Ansys BladeGen: Blade Lean Angles shelmak ANSYS 3 April 15, 2015 03:40
[ICEM] ICEM Hexa meshing tutorial - Wing with sharp trailing edge Far ANSYS Meshing & Geometry 34 October 21, 2013 05:46
Verifying results for a wind turbine blade simulation in ANSYS CFX Joystix CFX 3 April 27, 2012 17:52


All times are GMT -4. The time now is 22:30.