CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Negative Volume in fuel injection system

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 17, 2018, 16:30
Default Negative Volume in fuel injection system
  #1
New Member
 
Abhay
Join Date: Apr 2018
Posts: 1
Rep Power: 0
abhaymh is on a distinguished road
I have a combustion chamber, with a fuel injector pipe leading upto it. There are many cells with negative volume near the interface of the combustor wall and the inlet pipe.
The .blk file : https://drive.google.com/open?id=103...uVSVkn5kXy9nxD

The .tin file : https://drive.google.com/open?id=11b...VAQyZJYEUWy7gw
abhaymh is offline   Reply With Quote

Reply

Tags
ansys, combustion chamber, icem, meshing, multiple blocks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 06:09
[ANSYS Meshing] Small mesh error: Zero or negative volume for elements. [Explicit dynamics] matin ANSYS Meshing & Geometry 0 September 14, 2017 20:19
Problem of simulating of small droplet with radius of 2mm liguifan OpenFOAM Running, Solving & CFD 5 June 3, 2014 02:53
[blockMesh] non-orthogonal faces and incorrect orientation? nennbs OpenFOAM Meshing & Mesh Conversion 7 April 17, 2013 05:42
remeshing due to negative volume error Doginal CFX 1 August 21, 2011 21:50


All times are GMT -4. The time now is 23:57.