|
[Sponsors] |
DPM Pressure Swirl Nozzle Direction Problem (2D) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 15, 2022, 23:16 |
DPM Pressure Swirl Nozzle Direction Problem (2D)
|
#1 |
New Member
liu fei
Join Date: May 2022
Posts: 2
Rep Power: 0 |
Hi,
The 2D grid I drew with ICEM has an axis of symmetry. But when I used the pressure swirl nozzle in the FLUENT DPM model, my jet direction was perpendicular to the screen. Is there any way to adjust it (Fluent 19.2)? please help me. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
modeling a pressure swirl nozzle spray | TanjuErgen | FLUENT | 4 | October 12, 2015 03:51 |
Having Problem solving 2D supersonic flow around a plug nozzle | chrislloyd | FLUENT | 7 | July 22, 2015 13:09 |
Pressure dissipation problem in bubble simulation (Riemann problem) | ndabir | FLUENT | 0 | June 3, 2015 20:17 |
Nozzle Flow - Divergence Problem | Ijaz | FLUENT | 9 | January 11, 2014 04:36 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |