CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Boundary condition cant be set up in Response Spectrum analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 25, 2020, 06:00
Default Boundary condition cant be set up in Response Spectrum analysis
  #1
New Member
 
Yuwei Gao
Join Date: Feb 2020
Posts: 1
Rep Power: 0
Alios is on a distinguished road
pic.png
as you can see, there is no option under Boundary condition. dont know why.

could anyone plz tell me the reason of that? thanks
Alios is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
does Hyperthreading affect the application of UDF? SJSW Fluent UDF and Scheme Programming 11 October 10, 2018 22:28
several fields modified by single boundary condition schröder OpenFOAM Programming & Development 3 April 21, 2015 05:09
Low Mixing time Problem Mavier CFX 5 April 29, 2013 00:00
How to set the boundary condition for thermal analysis sivakumar OpenFOAM Pre-Processing 0 August 20, 2008 06:45
Set the boundary condition chris FLUENT 0 July 24, 2006 21:05


All times are GMT -4. The time now is 08:14.