Meshing an aerofoil with serrated trailing edges using unstructured Mesh

Kuda · January 4, 2017, 15:42

I am having problems meshing (unstructured) an airofoil (2D) with a serrated trailing edge as the skewness is coming up to be very high. Any tips as to how I can approach the problem will be awesome.

mkustin · January 9, 2017, 10:14

Hello, I am having the same problem. Working on a very similar airfoil and it seems to be the high skew comes from the meshing in between each serration and on the end of each serration. Still trying to fix it myself. The picture included highlights the cells that have a skew of over 0.85.

cfduser99 · October 26, 2020, 14:57

Hello, I'm facing a very similar problem, can you tell me how you solved it?
Thanks.

arnie333 · November 1, 2020, 01:10

Modify the geometry slightly I.e. cut off the sharp trailing edge to give you a small blunt edge. Then apply an equivalent mesh size to that ‘blunt’ surface.
This change to the geometry will result in a better mesh and an insignificant change to your results.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] SnappyHexMesh running killed!	Mark JIN	OpenFOAM Meshing & Mesh Conversion	7	June 14, 2022 01:37
[ICEM] Just started unstructured mesh !	diamondx	ANSYS Meshing & Geometry	6	September 5, 2012 07:15
[snappyHexMesh] snappyHexMesh aborting	Tobi	OpenFOAM Meshing & Mesh Conversion	0	November 10, 2010 03:23
Meshing trailing edge of aerofoil	CC	Main CFD Forum	7	December 10, 2008 20:22
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

October 26, 2020, 14:57		#3
cfduser99 New Member Join Date: Dec 2017 Posts: 8 Rep Power: 8	Hello, I'm facing a very similar problem, can you tell me how you solved it? Thanks.

November 1, 2020, 01:10		#4
arnie333 New Member Arnie Join Date: Mar 2017 Posts: 27 Rep Power: 9	Modify the geometry slightly I.e. cut off the sharp trailing edge to give you a small blunt edge. Then apply an equivalent mesh size to that ‘blunt’ surface. This change to the geometry will result in a better mesh and an insignificant change to your results.