How to add three layer of different coating in ansys geometry

Ajmit · November 13, 2020, 15:31

I have a turbine blade geometry & i want to add thermal barrier coating
(3 coat layer with different thickness). I tried many softwares & ansys geometry also. After adding three coat layer with surface offset method (surface with face) & added thickness in outward direction. when i add only one layer then it's fine but when i add three layer & save it in iges file then again import in ansys geometry, automatically so many (more than original one) surface & body created in ansys. Kindly tell me the correct procedure.

Ajmit · November 16, 2020, 03:14

Problem Solved, when I saved in parasolid format (text or binary) instead of iges. If we create solid body from surface body, i.e, coating then it must be saved in parasolid format to retain the file otherwise in iges format automatically so many redundant surface & bodies will generate

November 13, 2020, 15:31	How to add three layer of different coating in ansys geometry	#1
Ajmit New Member AJMIT KUMAR Join Date: Jul 2020 Location: India Posts: 5 Rep Power: 5	I have a turbine blade geometry & i want to add thermal barrier coating (3 coat layer with different thickness). I tried many softwares & ansys geometry also. After adding three coat layer with surface offset method (surface with face) & added thickness in outward direction. when i add only one layer then it's fine but when i add three layer & save it in iges file then again import in ansys geometry, automatically so many (more than original one) surface & body created in ansys. Kindly tell me the correct procedure.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[mesh manipulation] createpatch not working when using layer addition in snappyHexMesh	Dikkeunit	OpenFOAM Meshing & Mesh Conversion	0	February 3, 2020 09:46
[snappyHexMesh] Problem airfoil snappyhexmesh add layer	bye bye my blue	OpenFOAM Meshing & Mesh Conversion	1	May 5, 2017 05:56
[snappyHexMesh] sHM layer process keeps getting killed	MBttR	OpenFOAM Meshing & Mesh Conversion	4	August 15, 2016 03:21
[snappyHexMesh] Boundary layer generation problems	ivan_cozza	OpenFOAM Meshing & Mesh Conversion	0	October 6, 2010 13:47
Problem importing GAMBIT mesh to Ansys geometry	David G.	CFX	0	June 19, 2005 06:01

November 16, 2020, 03:14		#2
Ajmit New Member AJMIT KUMAR Join Date: Jul 2020 Location: India Posts: 5 Rep Power: 5	Problem Solved, when I saved in parasolid format (text or binary) instead of iges. If we create solid body from surface body, i.e, coating then it must be saved in parasolid format to retain the file otherwise in iges format automatically so many redundant surface & bodies will generate