Problem with Raw Optimization Data in Ansys Optimization -- CFD Online Discussion Forums

August 29, 2023, 11:37	Problem with Raw Optimization Data in Ansys Optimization	#1
Mohsen_mtl New Member QC Join Date: Mar 2019 Posts: 8 Rep Power: 7	Hello, I am running an optimization problem in Ansys workbench 2022. I have a CFX simulation with 3 input parameters (P1, P2 & P3) and one output. I can run the optimization without any problem. Now I want to duplicate the CFX simulation. Therefore, now I have 6 input parameters (P1, P2, P3, P4, P5 & P6) and 2 outputs. I have a problem Now! Because we know: P1 = P4 P2 = P5 P3 = P6 I can not define these relations in the optimization section. I tried to modify the Raw Optimization Data and choose the same input value for P1 and P4 (P2 & P5 and also P3 & P6 ) but it was impossible. It seems we can not modify the Raw Optimization Data or import data from a CSV file. Do you have any suggestions?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yes, some codes could be better than ANSYS	Dr Youssef Hafez	ANSYS	0	January 13, 2023 11:41
Can you help me with a problem in ansys static structural solver?	sourabh.porwal	Structural Mechanics	0	March 27, 2016 17:07
Import data problem ANSYS workbench	eaglemckenna	FLUENT	0	February 23, 2016 04:28
Problem with an old Simulation	FrankW	CFX	3	February 8, 2016 04:28
Ansys workbench problem	Jonny6001	ANSYS	2	September 30, 2010 12:59

All times are GMT -4. The time now is 14:56.