CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Mesh Airfoil in ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 10, 2009, 08:14
Default Mesh Airfoil in ICEM
  #1
New Member
 
s.k
Join Date: Sep 2009
Posts: 7
Rep Power: 16
student123a is on a distinguished road
Hi,
im new to using ICEM from ansys, and i have been running into quiet a few problems when trying to mesh an airfoil in the program. Ive drawn up the airfoil and have created a boundary around it, but I dont know how to mesh it properly. When i try to mesh the boundary, I cant define the cell size and i cant get ICEM to recognise the airfoil itself (the mesh goes straight though it)

Can anyone help me?

Many Thanks
student123a is offline   Reply With Quote

Old   October 20, 2009, 05:18
Default ICEM Meshing
  #2
New Member
 
Richard
Join Date: Oct 2009
Posts: 1
Rep Power: 0
rdlongview is on a distinguished road
If I remember correctly, there are tutorials, including one for a wing,
in with the program.
rdlongview is offline   Reply With Quote

Old   October 21, 2009, 08:41
Default
  #3
New Member
 
Mike
Join Date: Apr 2009
Posts: 3
Rep Power: 16
Jackill is on a distinguished road
probably, you need mesh parameters for surface -upper section icon -Mesh-Surface mesh setup -
for different mesh volume generation use Geometry -Create- Body - Material point for determining which volume you need to mesh
Jackill is offline   Reply With Quote

Old   January 24, 2010, 12:54
Default
  #4
New Member
 
Yibin Dou
Join Date: Dec 2009
Posts: 13
Rep Power: 16
adam_annie is on a distinguished road
Which airfoil do you mesh? I think you can find some mesh of airfoil in website, which is used to do for CFD validation. You can reference them about how to mesh boundaries. Good luck.
adam_annie is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] icem hexa mesh parts pb jaber ANSYS Meshing & Geometry 3 July 5, 2009 07:23
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
ICEM 10 mesh question DAK565656 CFX 6 May 8, 2007 13:16
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
prob while exporting icem cfd hexa mesh to fluent mani CFX 4 March 7, 2007 04:41


All times are GMT -4. The time now is 00:18.