ESE Chsmber modeler error

hamedhamed · February 23, 2013, 13:09

Hi,

im using AVL Fire 2011 to generate a dynamic mesh for meshing a cylinder. after creating the required selections and edges and introducing the movements, when i want to work on port connection this error occurs and AVL Fire is closed.

''python.exe has stoped working''

how can i fix it?

best regards

Max_TRD · April 9, 2014, 04:13

Hello hamedhamed,
I have the same problem with ESE Chamber modeler. When I want to open the 2D templet the same error msg is comming ''python.exe has stoped working''. I have no idea if my application is wrong or is this a software problem. Did you solved this problem?

hamedhamed · April 9, 2014, 06:00

Hi Maximilian,

actually I solved the problem.
I converted all geometry dimensions from millimeter to meter.
If your dimensions are in terms of millimeter, it may help.

good luck,
hamed

Max_TRD · April 9, 2014, 11:36

Hello Hamed,

thank you very much for your replay!!! I am new in ESE so I am a little bit helpless. You mean the surface mesh unit or? If yes how can I check if my surface mesh (bulid in the workflow) is in which unit and how I can convert it? If I measure the surface Mesh in the workflow Manager (for instance bore) its is given in meter. => unit is meter?

Kind Regards
Max

Max_TRD · April 9, 2014, 16:32

Hello Hamed,

I found already my mistake. My squisch edges as not circular.
But still thank you very much for helping.
Regards
Max

February 23, 2013, 13:09	ESE Chsmber modeler error	#1
hamedhamed New Member hamed Join Date: Feb 2013 Posts: 24 Rep Power: 12	Hi, im using AVL Fire 2011 to generate a dynamic mesh for meshing a cylinder. after creating the required selections and edges and introducing the movements, when i want to work on port connection this error occurs and AVL Fire is closed. ''python.exe has stoped working'' how can i fix it? best regards

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 18:00
c++ libraries and solver compiling	vaina74	OpenFOAM Installation	13	February 3, 2012 17:43
[OpenFOAM] Saving ParaFoam views and case	sail	ParaView	9	November 25, 2011 15:46
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51
user defined function	cfduser	CFX	0	April 29, 2006 10:58

April 9, 2014, 04:13		#2
Max_TRD New Member Maximilian Join Date: Apr 2014 Posts: 3 Rep Power: 11	Hello hamedhamed, I have the same problem with ESE Chamber modeler. When I want to open the 2D templet the same error msg is comming ''python.exe has stoped working''. I have no idea if my application is wrong or is this a software problem. Did you solved this problem?

April 9, 2014, 06:00		#3
hamedhamed New Member hamed Join Date: Feb 2013 Posts: 24 Rep Power: 12	Hi Maximilian, actually I solved the problem. I converted all geometry dimensions from millimeter to meter. If your dimensions are in terms of millimeter, it may help. good luck, hamed

April 9, 2014, 11:36		#4
Max_TRD New Member Maximilian Join Date: Apr 2014 Posts: 3 Rep Power: 11	Hello Hamed, thank you very much for your replay!!! I am new in ESE so I am a little bit helpless. You mean the surface mesh unit or? If yes how can I check if my surface mesh (bulid in the workflow) is in which unit and how I can convert it? If I measure the surface Mesh in the workflow Manager (for instance bore) its is given in meter. => unit is meter? Kind Regards Max

April 9, 2014, 16:32		#5
Max_TRD New Member Maximilian Join Date: Apr 2014 Posts: 3 Rep Power: 11	Hello Hamed, I found already my mistake. My squisch edges as not circular. But still thank you very much for helping. Regards Max